Wholesale 100% Original Coated Aluminum Coil to Argentina Manufacturers
In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for Wholesale 100% Original Coated Aluminum Coil to Argentina Manufacturers, Welcome any inquiry to our company. We will be glad to establish friendly business relationships with you!
This series coated aluminum coil provided by Mintai includes 1100, 1050, 1070 series, etc. The 1050, 1060 and 1070 series are representative series.
1000 Coated Aluminum Coil Features
♦ Alloy:1050 1060 1070 1100 1200 1235 etc.
♦ This coated aluminum coil, which is also called prepainted aluminum coil, has the highest aluminum content among all the series produced by Mintai. Its aluminum content can be more than 99.00%.
♦ As no other techniques are involved in the production, the production procedure is single and the price is cheap. It is a commonly used coated aluminum coil in conventional industries.
♦ The last two numbers in serial number are used to determine the lowest aluminum content of this series. For example, in the 1050 series, the last two numbers are 50 and according to corresponding international standard, the aluminum content has to reach 99.5% or more. In GB/T3880-2006, the technical standard of aluminum alloy in China, 1050 series also means the aluminum content has to reach 99.5%. Similarly, the aluminum content of 1060 series coated aluminum coil has to reach 99.6% or more.
As a professional manufacturer and supplier of 1000 coated aluminum coil based in China, apart from coated aluminum coil, we also provide aluminum sheet, aluminium slit coil, aluminum strip, anodising aluminum sheet, diamond aluminum tread plate, aluminum coil, and more. For further information on any of our products, please feel free to contact us.
1000 Coated Aluminum Coil Appearance:
Cutting edge flat,clean, without burrs/raw edges/included side/ pyramid/bagginess/protruded tube core/arrow/layer covered/forward slash/bumping injury.
1000 Coated Aluminum Coil Appearance quality:
♦ Aluminum surface is very flat
♦ Aluminum surface is clean, with no corrosion freckled/grease stains/wrinkling/slotting/scratching/light or dark line/glue or roller vestige/vibration marks and diagonal.
♦ Aluminum foil is with no lightning spot/rolling mark/sand print and black line.
♦ Finished aluminium foil surface is without yellow grease stains/oil viscosity/bubbling and teared appearance.
♦ Surface wrinkle situation fit to state standard.
This video shows a technique of repairing holes in an aluminum boat which works for holes up to 1/4″ in diameter. Full instructions below. Please, feel free to ask questions.
1- The closed end rivets used to plug the holes are usually available in 1/8″, 3/16″ or 1/4″ diameter. Measure the diameter of the holes you need to plug and choose the smallest rivet that is larger than the hole. So if you measured .180″ you would choose 3/16″ rivets and if you measured .190″ you would choose 1/4″ rivets.
2- Using a drill bit that matches the diameter of the rivets you have selected, drill out the holes you will be repairing.
3- Apply a bead of 5200 sealant to the end of the rivet and insert it into the hole from the outside of the boat.
4- On the inside of the boat, slide a rivet washer over the end of the rivet.
5- Set the rivet.
6- Optionally, clean up the extra 5200 sealant around the rivet head with a rag or paper towel before it cures. You do not need to worry about wiping too much away. The only sealant that you actually need is locked between the head of the rivet and the rivet washer.
-closed end aluminum blind rivets (aluminum body / aluminum shank)
-drill bit matching rivet diameter
-aluminum rivet washers matching rivet diameter
-rivet setting tool with die installed to match rivets you are using
-3M 5200 marine adhesive sealant (regular or fast cure)
Where to buy materials:
Uporaba naftalana seže unazad 600-700 godina. Poznati svjetski putnik Marco Polo daje jedan od prvih zapisa o ljekovitosti naftalana. Sustavno korištenje naftalana iz Azerbajdžana počelo je krajem 19. stoljeća. Nakon što je 70-tih godina otkriveno nalazište naftenske nafte kod Ivanić Grada — “kriška nafta”, učinjena su brojna usporedna ispitivanja “kriške nafte ” i nafte iz Azerbajdžana. Ispitivanjima su utvrđena gotovo ista kemijska i biološka svojstva obje vrste nafte, te isključena njena moguća kancerogena i toksična djelovanja.