High Quality 1070 Aluminum Sheet for Gabon Importers

Short Description:

Product Detail


Product Tags

We have a professional, efficiency team to provide quality service for our customer. We always follow the tenet of customer-oriented, details-focused for High Quality 1070 Aluminum Sheet for Gabon Importers, We warmly welcome merchants from home and abroad to call us and establish business relationship with us, and we will do our best to serve you.

 1070 Aluminum Sheet


♦ alloy:1070
♦ temper:O~H112
♦ width:500mm-1500mm
♦ Length:according to your requirements

1000 Aluminum Sheet Features
♦ This series aluminum sheet, also called pure aluminum sheet, has the highest aluminum content among all the series produced by Mintai. Its aluminum content can be more than 99.00%.
1000 Series: 1050 1060 1070 1100 1200 1235 etc.

♦ As no other techniques are involved in the production, the production procedure is single and the price is cheap. It is a commonly used aluminum sheet in conventional industries.

♦ The last two numbers in the serial number are used to determine the lowest aluminum content of this series. For example, in the 1050 series, the last two numbers are 50 and according to the corresponding international standard, the aluminum content has to reach 99.5% or more. In GB/T3880-2006, the technical standard of aluminum alloy in China, 1050 series also means the aluminum content has to reach 99.5%. Similarly, the aluminum content of 1060 series aluminum sheet has to reach 99.6% or more.

1000 Aluminun sheet

This series aluminum sheet provided includes 1100, 1050, 1070 series, etc. The 1050, 1060 and 1070 series are representative series.

Type Alloy Temper Thickness Width Application
sheet 1050 O, H12, H14, H16, H18 0.3-0.5mm
Conducors,hoses,,marine accessories.
1060 Chemical and marine equipment
1070 Capacitor ventliation system compents
1100 Reflective devices,pipe,storage,Etc.
Other Products Aluminum plate 3xxx,5xxx,6xxx, Diverse temper
Aluminum tape 1xxx,3xxx,5xxx,6xxx,
Aluminum coils 1xxx,3xxx,5xxx,6xxx,
Aluminum foil 8011 O

1100 Aluminum Sheet Low strength aluminum alloy has excellent corrosion resistance and satisfactory anodizing and conversion coating finishing characteristics. It is unmatched by any other commercial aluminum alloy in workability. Readily to welding, brazing, and soldering. Machinability is poor and tends to be “gummy”. Non-heat treatable. 

As a China-based 1070 aluminum sheet manufacturer and supplier, we  also produce coated aluminum coil, aluminum plate, aluminium slit coil, aluminum strip, anodising aluminum sheet, embossed aluminum sheet, etc. For more detailed information, please continue browsing our website or feel free to contact us directly.

  • Previous:
  • Next:
  • FAQ Content

  • Video tutorial on how to remove the interior dashboard vents in a VW MK4 Golf. This tutorial includes the driver side, passenger side and center HVAC vents. In order to remove the dash vents on a Jetta or Bora MK4, it takes a slightly different procedure. This procedure can be used in order to replace/repair the vent, cleaning purposes, if you’re thinking about making any modifications, or upgrading your Golf style vents. Also included is how to remove the headlight switch, dimmer switch, hazard light switch, rear window defroster switch, and false switch caps. This particular tutorial was done on a 2004 Volkswagen Golf.

    Website: https://4diyers.com
    Facebook: https://www.facebook.com/4diyers
    Google Plus: https://plus.google.com/+4DIYers
    Twitter: https://twitter.com/4DIYers
    Instagram: https://www.instagram.com/4diyers/
    Tumblr: https://4diyers.tumblr.com
    Pintrest: https://www.pinterest.com/4diyers/
    Tools/Supplies Needed:
    -flat (standard) screwdriver
    -electrical tape
    -T20 torx screwdriver

    -first start by removing the driver and center movable vents by using a flat (standard) screwdriver with electrical tape wrapped on the tip prying them out
    -next remove the headlight switch by pushing the button in, then rotating clockwise, and pulling straight out
    -disconnect the electrical connector on the headlight switch
    -to remove the dimmer switch, using a flat (standard) screwdriver, slowly pry around the outer edge of the switch and work it out
    -once removed, disconnect the electrical connector from the rear
    -now remove the vent by pulling while wiggling out
    -you maybe able to grab that tang and pull back in order to make the vent removal easier
    -remove the two T20 torx screws from the driver side vent
    -one screw is by the duct opening and the other is behind the headlight switch location
    -moving onto the center vent, remove the two T20 torx screws which were behind the vent diffusers
    -pull out vent assembly and disconnect any electrical connectors for switch where necessary
    -some vehicles are equipped with headed seats or traction control, but rear window defroster and hazard lights are standard
    -switches in center vent assembly are easiest to be removed once the vent is remove, that way you can gain access from behind
    -to remove the passenger vent, it is not required to remove the diffuser
    -tilt the diffuser, grab onto it and then wiggle the vent and pull straight back
    -installation in reverse

    Thank you to all those who watch my videos and support my content. Don’t forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!

    © 4DIYers 2013
    All Rights Reserved
    No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.

    Related Products