<meta name="google-site-verification" content="e-neHNBj_m4MfBo4s3jSyGYZwmyK9GYZsgbbnUCM848" />

High definition wholesale Aluminum strip/foil for power transformer winding 1050/1060/1080/1100/1350 to Nairobi Factory

Short Description:


Product Detail

FAQ

Product Tags

We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for High definition wholesale Aluminum strip/foil for power transformer winding 1050/1060/1080/1100/1350 to Nairobi Factory, We welcome you to join us in this path of creating a prosperous and efficient business together.


 Aluminum strip/foil for power transformer winding 1050/1060/1080/1100/1350

Aluminum foil /strip with round edge without burr and flashing

Technical Specifications
Alloy: 1050/1060/1080/1100/1350
Temper:  H12,H14,H16,H18
Thickness: 0.2mm–2.0mm
Width: 50–1200mm
Packing: Eye to wall and eye to sky, wooden pallet and wooden case
U. T. S: 60-95N/mm2
Elongation: >25%
Max. Resistance in 20 degree: ≤ 0.02825Ω Mm2/m
Density in 20 degree: 2.703kg/dm3
Burr’s height: 0.01–0.03mm vary with thickness of the strip
Collapsed side’s height: 0.05–0.1mm
Surface: Free of oil,free of scratches

As a chinese leading aluminum strip manufacturer,we can give you the best service and most reasonable price.We also provide 5 bar aluminum tread plate,  aluminium slit coil, anodising aluminum sheet,aluminum sheet, diamond aluminum tread plate, and more. Whenever you have a need for any of our products, please feel free to contact us .

  • Previous:
  • Next:
  • FAQ Content




  • Please find this product at https://absupply.net/
    This video is to bring you a closer look at the Reese S257AV Panic Type Threshold – Mill Finish Aluminum – W/ Grey Vinyl Insert. 257 is representative of the type that it is. It is a bump up style threshold or a panic style threshold. I wouldn’t call it a panic style myself, but frankly, I’m not sure why they are calling it that. Panic style has a lip here for the bottom latch of the vertical rod exit device to latch against. I would call this a bump up style is what I would call it. This is an unusual one in sense that the S257 is very short. It’s overall height is 1/2″ and the dimension from the bottom of the threshold to the bottom of this is 1/4″ so this is not the one to use for stock hollow metal doors because your gap is 3/4″ however in instances where you no longer have the amount of typical undercut beneath the door and you want a bump up style threshold this will come in to play and that is where you see this in those instances where you don’t have the typical undercut dimension you would have on a hollow metal door on an exterior opening. The S 257 again is represented of the profile of this and is a bump up style as you can see. The A means is in mill aluminum finish. The V stands for the fact the seal is vinyl material. Dimensionally, it is 5″ wide which is very common. Lets get a tape measure on that and check it out. 5″ as you can see. We said the overall height was 1/2″ and that is indeed the case. You can see there that it is 1/2″ and down here it is only a 1/4″ so it is quite small down here. Available in a couple of different colors. The dark bronze and aluminum. Available in several different lengths on the web site. This is a 36″ piece. If you have need for a custom length by all means let us know by ordering the next longest piece or pieces and indicate in the comment field what length you want us to cut it back to. The reason is if you want to cut this 36″ piece to 30″ you will eliminate the countersink that is there. By the way screws are included and look like a #10 x 1-1/2″ flathead wood screw. If you order a custom length, we will locate the countersinks in the proper location and center to center based on the length of the threshold. You are better off doing that then ordering a 3′ piece and needing to cut it back because the next hole is all the way in the middle and you will be stuck drilling another hole over here. If you have to cut it any way, you might as well let us do it to minimize the amount of work you have to do to fit them into the opening, meaning coping around the frame and an L notch or whatever. If you have any questions regarding Reese S257AV Panic Type Threshold – Mill Finish Aluminum – W/ Grey Vinyl Insert or any other Reese product please feel free to reach out to us.
    Thank you!



    Website:https://www.bmjmetal.com/
    The main business includes, producing and selling cold-rolled stainless steel coil and plate, import and export of raw metal materials, such as aluminum, hot dip galvanized etc. International trade to south-east Asia, Japan, South Korea, Western Europe and other international market. The annual gross sales are more than five hundred million USD.

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us:

    Write your message here and send it to us