Good Quality for 1060 Aluminum Sheet for Anguilla Manufacturers

Short Description:


Product Detail

FAQ

Product Tags

The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme for Good Quality for 1060 Aluminum Sheet for Anguilla Manufacturers, With a wide range, good quality, reasonable prices and good service, we will be your best business partner. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!


1060 Aluminum Sheet

Specifications

♦ alloy:1060
♦ temper:O~H112
♦ width:500mm-1500mm
♦ SGS & ISO
♦ Length:according to your requirements

1000 Aluminum Sheet Features
♦ This series aluminum sheet, also called pure aluminum sheet, has the highest aluminum content among all the series produced by Mintai. Its aluminum content can be more than 99.00%.
1000 Series: 1050 1060 1070 1100 1200 1235 etc.

♦ As no other techniques are involved in the production, the production procedure is single and the price is cheap. It is a commonly used aluminum sheet in conventional industries.

♦ The last two numbers in the serial number are used to determine the lowest aluminum content of this series. For example, in the 1050 series, the last two numbers are 50 and according to the corresponding international standard, the aluminum content has to reach 99.5% or more. In GB/T3880-2006, the technical standard of aluminum alloy in China, 1050 series also means the aluminum content has to reach 99.5%. Similarly, the aluminum content of 1060 series aluminum sheet has to reach 99.6% or more.

1000 Aluminun sheet

This series aluminum sheet provided includes 1100, 1050, 1070 series, etc. The 1050, 1060 and 1070 series are representative series.

Type Alloy Temper Thickness Width Application
sheet 1050 O, H12, H14, H16, H18 0.3-0.5mm
0.5-1.0mm
1.0-5.0mm
400-700mm 
700-1600mm 
>1600mm
Conducors,hoses,,marine accessories.
1060 Chemical and marine equipment
1070 Capacitor ventliation system compents
1100 Reflective devices,pipe,storage,Etc.
Other Products Aluminum plate 3xxx,5xxx,6xxx, Diverse temper
Aluminum tape 1xxx,3xxx,5xxx,6xxx,
Aluminum coils 1xxx,3xxx,5xxx,6xxx,
Aluminum foil 8011 O

1100 Aluminum Sheet Low strength aluminum alloy has excellent corrosion resistance and satisfactory anodizing and conversion coating finishing characteristics. It is unmatched by any other commercial aluminum alloy in workability. Readily to welding, brazing, and soldering. Machinability is poor and tends to be “gummy”. Non-heat treatable. 

As a China-based 1060 aluminum sheet manufacturer and supplier, we  also produce coated aluminum coil, aluminum plate, aluminium slit coil, aluminum strip, anodising aluminum sheet, embossed aluminum sheet, etc. For more detailed information, please continue browsing our website or feel free to contact us directly.

  • Previous:
  • Next:
  • FAQ Content




  • Induction heating at last! It works great! I really like how efficient the flat coil is at boiling the water in about a minute.
    If you have any coil shapes you would like me to try, questions, or suggestions, post a comment!

    The circuit I used with the two inductors: https://markobakula.wordpress.com/power-electronics/500w-royer-induction-heater/

    Thank you for watching!



    Please find this product at https://absupply.net/
    This video is to bring you a closer look at the Pemko 177AT. This is a threshold as you can see and is a nice threshold from Pemko. This is the one that I would use. Here is what I mean by that. It is nice and heavy. It has a good thickness on the extrusion. That tells me based on experience that this is going to last long, take a lot of traffic, be able to withstand a lot of use and volume. I like this threshold also because it is a bump up style and we will talk about that more in a moment. It is a smart threshold in the sense that it can work very well with surface mounted exit devices which we will talk more about in a moment. It has these serrations that are underneath on this side here and when you are getting this item screwed down to the floor it has a tendency to resist that lateral force. Lets go over it. The 177 is representative of this profile. This is a bump up or latch track or panic threshold. The A means milled aluminum finish. This is going to be available from Pemko in the D finish which is dark bronze anodized aluminum and the G finish which is a gold anodized aluminum. The T means thermo seal and that is good because that thermo seal that is here is good long lasting effective, replaceable should you someday need to replace it. We can help you with replacement material. Made of aluminum. There is an image below this video showing the important dimensional properties of this threshold. Lets go over that now. Why this threshold is really great is because it is a good width, 5″. 5″ is really nice and common for lots of thresholds because it is compatible with your typical jamb depth on a hollow metal door, 5-3/4″ very common and this would complement a 5-3/4″ jamb depth really well. I don’t see these installed overwhelmingly often on aluminum storefront doors but you do see these installed and 5″ fits into that realm as well. The other thing that makes this really nice is the overall height is 7/8″. Down here it is for 1/2″ and that is going to make it very compatible with typical industry hollow metal doors where the undercut is basically 3/4″. So all of that conspires to make it very common. What I like to do with this threshold and why people use this is because you are getting a very good seal of the face of the door pressing up against that threshold. The only downside of this is that you still need a door sweep is what I’m trying to say. You don’t want your point of barrier of weather on this side of the door you want it out here. So you might consider adding a bristle sweep, something neoprene maybe, or a bristle that has an angle to it because it will dovetail, not dovetail but mate very nicely to this sloped surface that is here. I’m partial to them because of that, but I’m partial to them also because they have great customer service, predictable and reliable lead times, and they are able to pull the proverbial rabbit from the hat occasionally which is always appreciated, and great value for the dollar spent. If you have any questions on the Pemko 177AT bump up style mill finished latching panic exit saddle threshold with black thermo seal insert or any other Pemko product, please feel free to reach out to us. Thank you.

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us:

    Write your message here and send it to us