Good quality 100% Coated Aluminum Coil to Algeria Importers
We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for Good quality 100% Coated Aluminum Coil to Algeria Importers, Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!
This series coated aluminum coil provided by Mintai includes 1100, 1050, 1070 series, etc. The 1050, 1060 and 1070 series are representative series.
1000 Coated Aluminum Coil Features
♦ Alloy:1050 1060 1070 1100 1200 1235 etc.
♦ This coated aluminum coil, which is also called prepainted aluminum coil, has the highest aluminum content among all the series produced by Mintai. Its aluminum content can be more than 99.00%.
♦ As no other techniques are involved in the production, the production procedure is single and the price is cheap. It is a commonly used coated aluminum coil in conventional industries.
♦ The last two numbers in serial number are used to determine the lowest aluminum content of this series. For example, in the 1050 series, the last two numbers are 50 and according to corresponding international standard, the aluminum content has to reach 99.5% or more. In GB/T3880-2006, the technical standard of aluminum alloy in China, 1050 series also means the aluminum content has to reach 99.5%. Similarly, the aluminum content of 1060 series coated aluminum coil has to reach 99.6% or more.
As a professional manufacturer and supplier of 1000 coated aluminum coil based in China, apart from coated aluminum coil, we also provide aluminum sheet, aluminium slit coil, aluminum strip, anodising aluminum sheet, diamond aluminum tread plate, aluminum coil, and more. For further information on any of our products, please feel free to contact us.
1000 Coated Aluminum Coil Appearance:
Cutting edge flat,clean, without burrs/raw edges/included side/ pyramid/bagginess/protruded tube core/arrow/layer covered/forward slash/bumping injury.
1000 Coated Aluminum Coil Appearance quality:
♦ Aluminum surface is very flat
♦ Aluminum surface is clean, with no corrosion freckled/grease stains/wrinkling/slotting/scratching/light or dark line/glue or roller vestige/vibration marks and diagonal.
♦ Aluminum foil is with no lightning spot/rolling mark/sand print and black line.
♦ Finished aluminium foil surface is without yellow grease stains/oil viscosity/bubbling and teared appearance.
♦ Surface wrinkle situation fit to state standard.
Established in 2005, The Wipe Hotwire India Thermal Equipments (P) Ltd. is a leading manufacturer, supplier and exporter of PTFE/ETFE/XLPE insulated heating wires, cables, mats and heating equipment. Our range of products includes under floor/Under Tile Heating Elements & Mats, In Concrete/Snow Melting Heating Cables, Under Carpet Heating Mats, Heated Towel Rails, Heated Foot Mats, Mirror De-Misters, Aluminum Foil Heaters, etc. We offer you a source for well engineered, high quality products meeting International safety and performance standards.
For more information : Log on to www.wipehotwire.com
Or mail us at email@example.com
Video tutorial on how to drill and tap threads into aluminum. In this video I have used a specific type of tap called a “gun tap” which allows me to make a straight run/cut of threads into the material without having the need to continuously back the tap out of the hole to keep the cutting threads clean. Other types of taps need to be backed out of the hole after a few new thread cut in order to reduce the risk of material binding and keeping a clean cut. It is always good practice to buy high quality taps as they will last a very long time and it reduces the risk of breaking due to higher quality materials used. The piece I am working with today is an anti shudder valve from a Volkswagen diesel. The reason I am added threaded holes to the unit is so that I am able to install grub screws to hold the boost pipe in place without it popping open under pressure and causing a boost leak. The tabs on the pipe are worn out therefore the grub screws will hold it in place instead. This is an inexpensive and easy fix for the current issue. A new replacement pipe from the dealer is worth $100, eventually down the road it will run into the same problem.
Google Plus: https://plus.google.com/+4DIYers
-ensure that the object you are working with is clean
-ensure that the tap you are using is clean
-mark out where you would like the threaded hole, then using a center punch and a hammer mark the center of the hole
-the center punch marks the center of the hole and will reduce the risk of the drill bit wandering
-using a drill and tap index, determine what size drill bit is required for the hole
-the drill bit must be smaller than the tap size
-clamp the object down to ensure it doesn’t move while also reducing the risk of a safety hazard
-use cutting oil if needed when drilling the hole
-clean the hole before getting ready to tap threads
-apply cutting oil to the tap and hole
-ensure the newly drilled hole and tap is lined up correctly
-don’t use the drill press’ power for this procedure
-slowly feed the tap down to the object and turn the drill chuck by hand
-apply cutting oil when needed
-feed the tap all the way in the hole, then loosen the chuck and allow the chuck to be removed from the tap
-remove the tap by hand
-clean any cut material away from the hole
-clean tap when done before putting away
Thank you to all those who watch my videos and support my content. Don’t forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.