Factory best selling Aluminum strip/foil for power transformer winding 1050/1060/1080/1100/1350 Wholesale to Angola

Short Description:

Product Detail


Product Tags

In order to best meet client's needs, all of our operations are strictly performed in line with our motto " High Quality, Competitive Price, Fast Service " for Factory best selling Aluminum strip/foil for power transformer winding 1050/1060/1080/1100/1350 Wholesale to Angola, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.

 Aluminum strip/foil for power transformer winding 1050/1060/1080/1100/1350

Aluminum foil /strip with round edge without burr and flashing

Technical Specifications
Alloy: 1050/1060/1080/1100/1350
Temper:  H12,H14,H16,H18
Thickness: 0.2mm–2.0mm
Width: 50–1200mm
Packing: Eye to wall and eye to sky, wooden pallet and wooden case
U. T. S: 60-95N/mm2
Elongation: >25%
Max. Resistance in 20 degree: ≤ 0.02825Ω Mm2/m
Density in 20 degree: 2.703kg/dm3
Burr’s height: 0.01–0.03mm vary with thickness of the strip
Collapsed side’s height: 0.05–0.1mm
Surface: Free of oil,free of scratches

As a chinese leading aluminum strip manufacturer,we can give you the best service and most reasonable price.We also provide 5 bar aluminum tread plate,  aluminium slit coil, anodising aluminum sheet,aluminum sheet, diamond aluminum tread plate, and more. Whenever you have a need for any of our products, please feel free to contact us .

  • Previous:
  • Next:
  • FAQ Content

  • How well does common aluminum screening shield radio-frequency radiation?
    Here is another video about the HF analyzer used in this video:

    Please find this product at https://absupply.net/
    This video is to bring you a closer look at the Pemko Product 229A mill finish aluminum half saddle threshold. The 229 is representative of this profile and the A stands for the fact that it is mill finish aluminum. This is going to be available in the D finish for dark bronze and the G finish for the gold anodized. It is 5″ wide and the height of the threshold is 1/2″. The 229 is also representative of the fact that this is a substantially heavy threshold and you would use there where you want expect a lot of volume and even hand carts or heavier items needing to go over the threshold. I don’t think it’s out of line to use this at a convenience store or grocery store where you have the hand cards coming in and out of the store. This is going to be listed on the website in lengths from 2ft-8ft and anything really in between usually in 6″ increments. If you have need for a custom length by all means let us know by ordering the next longest piece or pieces and simply indicate in the comment field what length you would like for us to cut it to. If you need longer than 8ft, that is available as well but they are not listed on the website due to the cost to shipping total but that length can be accommodated if you need it. When you purchase a custom length we will trim it and put that first countersink at the proper distance from the edge but the proper center to center as well. Screws are included in a complimentary finish. There is a link below this video to the manufactures page where you can pull up not only all the Pemko products that we sell but a list to the manufactures website with a link to the full product catalog. I am partial to Pemko and it’s because of several reasons: they are the broadest spectrum of available weather stripping from a single manufacture, excellent customer service and shipping time. If you have any questions on the Pemko 229A half saddle heavy duty threshold or any other Pemko product please feel free to reach out to us. Thank you

    Related Products