<meta name="google-site-verification" content="e-neHNBj_m4MfBo4s3jSyGYZwmyK9GYZsgbbnUCM848" />

China Manufacturer for 5000 Series Aluminum Plate Export to Singapore

Short Description:


Product Detail

FAQ

Product Tags

We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for China Manufacturer for 5000 Series Aluminum Plate Export to Singapore, We are confident that there will be a promising future and we hope we can have long term cooperation with customers from all over the world.


This major series of this series aluminum plate provided by Mintai includes 5005, 5052, 5754, 5083 series.

5000 Series Aluminum Plate
♦ Width:500-2200mm
♦ Thickness:1-200mm
♦ Length:2000-8000mm
♦ Application:decoration, outer shell for household products
♦ Packing:blank waterproof paper , kraft, wooden case or pallet (fumigation report for the wooen packing material )
♦ Grade:5005 5052 5083 5086 5154 5182 5251 5754 etc.
♦ Features Very good elongation, anticorrosion performance

5000 Aluminum Plate Features
♦ The main ingredient of this series aluminum plate is magnesium element and the content is between 3% and 5%. It is also called aluminum magnesium alloy.
♦ With its low density, it features high tensile strength and elongation.
♦ This series aluminum plate is a commonly used and mature series in China.

5000 Aluminum Plate Applications
♦ With the same area of other series, the weight of this aluminum plate is lighter. As a result, it is used in aviation, such as in the fuel tanks in airplanes.
♦ It is widely used in conventional industries.
♦ This aluminum plate can be used in continuously casting and rolling. It can be hot rolled. As a result, it can be used in oxidation and deep processing.

Note:
Special dimensions can be produced according to your requirement

Hangzhou Jinding Aluminium Industry Co., Ltd.  is a professional manufacturer and supplier of 5000 aluminum plate based in China. We also offer aluminum coil, aluminium slit coil, aluminum sheet, coated aluminum coil, diamond aluminum tread plate,and more. Whenever you have a need for any of our products, please feel free to contact us.

  • Previous:
  • Next:
  • FAQ Content




  • For More details please contact us via:
    website: www.coppercasttechnology.com
    Email:coppercasttechnology@yahoo.com
    Wechat ID :coppercasttechnology.



    Please find this product at https://absupply.net/
    This video is to bring you a closer look at the Pemko 2748A. This is a piece of mill finish aluminum and it is a commercial saddle type threshold. This is just a 6″ sample just for the purposes of this video. 2748A, that all conspires to mean that this is 8″ wide, that it is 1/4″ tall and that is certainly handicap compliant. The A in the part number means mill aluminum finish. You will also be able to order this in the D finish which is dark bronze anodized and the G finish which is gold anodized as well. This is going to be used very typically in exterior doors where 8″ fits the bill perfectly. You might have a slightly deeper then average frame, you might have something that is 6-9/16″, or something that is 8″ or bigger. Or you might have a condition by which you are going to cope the frame into the profile of the threshold so that this can actually seat in and run long all the way to the outside of the face. If you had a 8″ CMU and you were butting your hollow metal frame up to it, you might want this frame to run all the way long into the wall and that sort of scenario is where you would very likely use this. You will also use it occasionally if you need to make a custom offset threshold meaning you need just an offset threshold and you wanted this to be a 1/4″ 90 degree return except that you need it to be 6-7/8″. Well you are not going to find that but you could take this and rip that down with a table saw and make real quick work of making yourself an offset threshold. A condition for that would be an exterior door where you’ve got a sill and you are going to butt up to some 1/4″ VCT or whatever is applied down to the floor, some type of flooring condition that is just a 1/4″ thick would be an application for that. Available of course in all of the common lengths. Everything from 2′ to 8′ in about 6″ increments. This is again just a sample piece but if you were to order, lets say this was a 4′ piece that first countersink would be about 4 or 5 or 6 inches off of the end. Regardless if you needed to cut that back to 42″, you would eliminate that first countersink and now you are not only stuck cutting it down, but drilling and countersinking a new hole and it is possibly difficult to cut it so that it looks like it has a nice factory edge on it. That is 8″ if you had just a standard miter saw, you would certainly have to flip it over and cut twice. Then of course drilling a hole and sometimes more difficult to countersink. It is nice to have the countersink from the factory because it is a point of failure. I’ve seen lots of thresholds that are loose because what has happened is that the client has cut it down, drilled a hole, and into that hole just put a flathead screw and did not take the time to countersink it because they couldn’t. Because that screw is not seating into the countersink very well that threshold has a tendency to want to move laterally. Now this threshold has very small ridges that are in there and you can see right at the tip of my finger to help prevent that sort of lateral movement. So if you ordered a custom length, we would not only locate that first countersink at the proper distance from the edge, but the proper center to center as well. The name Pemko is synonymous with all things weatherstripping related and they do offer the broadest spectrum of weatherstripping from any one singular manufacturer. There is a link below this video to the manufacturer’s page where you can pull up their full line product catalog and review all things, not only commercial weatherstripping, but residential as well. Thresholds, perimeter gasketing, door sweeps, material made of aluminum like this, stainless steel, and architectural bronze as well. Any questions on the Pemko 2748A mill finish 8″ x 1/4″ saddle type threshold or any other Pemko product, please feel free to reach out to us. Thank you.

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us:

    Write your message here and send it to us