2016 China New Design Aluminum Lithographic Coil for Uzbekistan Manufacturer
We offer great strength in quality and development,merchandising,sales and marketing and operation for 2016 China New Design Aluminum Lithographic Coil for Uzbekistan Manufacturer, Sincerely hope we are growing up together with our customers all over the world.
♦ Material (alloy):1050, 1060
♦ Temper:H18, H19
Aluminium Lithographic Coil (also called PS panel) is a professional material that used for the printing application. It has high surface quality requirement. It is produced by surface degreasing solution, drying, photosensitive coating treatment and cutting to the specification that customer required.
This products are popular with national and overseas markets for its good quality and competitive price. such as southeast Asia, North America,Europe and so on. If you are interested in our products, welcome to contact with us
We professionally offering PS plate with below characteristics:
1 Photosensitive Coating
Consisted by imported photographic emulsion and resin, the coating layer of the plate have outstanding alkaline resistance, superior stability, high sensitive and increased adjusting flexibility as well as better resolving power.
2 Vacuum ventilating layer
With tiny ventilating grain layer on the surface, the vacuuming time during exposure can be greatly decreased, as well as preventing the proportion of tiny dots from exposuring to vague.
3. Water Receptive Layer
Excellent water reception capability speeds up the ink-water balance procedure and helps to reduce water absorption during printing process. Superior water retaining capability do effectively prevents non-image areas of the plate from scumming and avoids paper from distortion. Consequently, the printing quality improved
4. Multi Grain Layers
Multi grain layers polish up water receptive property of the non-image areas on the plate. It increases the ink /water adjusting flexibility, make sure the developing performance of the tiny dots. It also strengthens the dots’ adsoption power to the coating layer, which can consequently extend the run-length of the plate.
5. Anodic-Oxidized Layer
A durable and strong oxidized surface formed after the anodic oxidation process on the aluminium material, which can help to prolong the run-length. This layer can also resists the corrosive effect done by the correction fluid.
how to video copyright 2011 Aluminium audio did not come out well. on video see below
let dry 24 hours – with out any moisture.
it must be over 50 degrees to use quick cool seal.
Aluminum roof. Aluminium roof. this roof might be galvanized. worked great.
sand and clean area down to metal. use 91 % rubbing alchol as final cleaner- let dry – so dry wall tape will stick.
dry wall mesh – 4 layer dry wall mesh .
cool seal – quick cool seal for Aluminium – roof. can buy at lowes in can.
not the rubber roof one.
1. put the dry wall tape on – 3 layers- criss – cross .
2. then put on cool seal- 1 coat – let dry -
3. then put on second layer dry wall tape 1 layer .- then
4. coat with second layer of cool seal.
5. let dry 24 hours. this cool seal takes time to dry.
cool seal works great . no leaks . its been about 1 year.
look at weather before you start.
I used this on Aluminium worked great ! – and this camper – might be galvanized metal. worked great !
I also used on cement walls to patch holes ! . and on a roof tile to patch a hole.
clean area well down to the metal use sand paper on metal .clean.
this quick cool seal shrinks . so apply little more to last coat.
We took a $20 digital scale from Target and hooked it up to an amplifier and a microcontroller. This video outlines taking apart the scale, wiring it to the amplifier, and the code, as well as an overview of the concepts behind strain gauges and Wheatstone bridges. There’s a demo of two live scale apps written in Python near the end of the video.
For the source code or more information about our microcontroller kits, go to https://www.nerdkits.com/videos/weighscale/