20 Years Factory Aluminum Lithographic Coil to Niger Manufacturer
Gaining customer satisfaction is our company's aim forever. We will make great efforts to develop new and top-quality products, meet your special requirements and provide you with pre-sale, on-sale and after-sale services for 20 Years Factory Aluminum Lithographic Coil to Niger Manufacturer, Our tenet is 'Reasonable prices, efficient production time and best service .' We hope to cooperate with more customers for mutual development and benefits.
♦ Material (alloy):1050, 1060
♦ Temper:H18, H19
Aluminium Lithographic Coil (also called PS panel) is a professional material that used for the printing application. It has high surface quality requirement. It is produced by surface degreasing solution, drying, photosensitive coating treatment and cutting to the specification that customer required.
This products are popular with national and overseas markets for its good quality and competitive price. such as southeast Asia, North America,Europe and so on. If you are interested in our products, welcome to contact with us
We professionally offering PS plate with below characteristics:
1 Photosensitive Coating
Consisted by imported photographic emulsion and resin, the coating layer of the plate have outstanding alkaline resistance, superior stability, high sensitive and increased adjusting flexibility as well as better resolving power.
2 Vacuum ventilating layer
With tiny ventilating grain layer on the surface, the vacuuming time during exposure can be greatly decreased, as well as preventing the proportion of tiny dots from exposuring to vague.
3. Water Receptive Layer
Excellent water reception capability speeds up the ink-water balance procedure and helps to reduce water absorption during printing process. Superior water retaining capability do effectively prevents non-image areas of the plate from scumming and avoids paper from distortion. Consequently, the printing quality improved
4. Multi Grain Layers
Multi grain layers polish up water receptive property of the non-image areas on the plate. It increases the ink /water adjusting flexibility, make sure the developing performance of the tiny dots. It also strengthens the dots’ adsoption power to the coating layer, which can consequently extend the run-length of the plate.
5. Anodic-Oxidized Layer
A durable and strong oxidized surface formed after the anodic oxidation process on the aluminium material, which can help to prolong the run-length. This layer can also resists the corrosive effect done by the correction fluid.
Auotmatic aluminum foil rewinding machine
Small meter aluminum foil rewinder
Automatic rewinding machine for aluminum foil
2017 Porsche 911 Carrera GTS Racing Yellow – Drive, Interior and Exterior.
Porsche is expanding the 911 product line with the GTS models. From March 2017, a total of five variants will be available in Germany: the 911 Carrera GTS with rear-wheel drive, the 911 Carrera 4 GTS with all-wheel drive – both of the above availa-ble as a Coupé and Cabriolet – and the 911 Targa 4 GTS with all-wheel drive. A newly developed turbocharger for 3.0-litre six-cylinder flat engine increases power to 331 kW (450 PS). The engine delivers 22 kW (30 hp) more than the 911 Carrera S and 15 kW (20 hp) more than the corresponding GTS prior model with a naturally aspirated engine. All variants are available with a manual seven-gear transmission or optional Porsche Doppelkupplung (PDK).
More power for more performance
The maximum torque of 550 Nm provides even better acceleration and elasticity figures. The torque is available between 2150 and 5000 rpm. Porsche Active Suspension Management (PASM) is included as standard on all GTS models. The GTS Coupés feature the PASM sports chassis, which lowers the body by ten millimetres. The fastest sprinter in the family is the 911 Carrera 4 GTS Coupé: With Porsche Doppelkupplung (PDK) and the Sport Chrono Package as standard, it races from zero to 100 km/h in 3.6 seconds. All GTS models feature a top speed in excess of 300 km/h. The frontrunner at 312 km/h is the Coupé with manual transmission and rear-wheel drive.
Despite the increase in performance, the GTS remains efficient – the 911 Carrera GTS with PDK, for example, consumes only 8.3 l/100 km according to the NEDC. This corresponds to CO2 emissions of 188 g/km.
Typical GTS: Numerous black elements both inside and out
The GTS models stand out within the 911 model line not only in terms of technology, but also in their visual design: All of the vehicles are based on the wide all-wheel-drive chassis, which measures 1852 mm even on the rear-wheel-drive models. The new Sport Design front apron emphasises the sporty character. The front end is aerodynamically optimised. A low front spoiler and increased rear spoiler extension height further reduce the lift forces on the front and rear axle compared to the Carrera S models. On the rear, the GTS is unmistakeable: smoked tail lights, silk-gloss black air intake grille and central black twin tailpipes of the sports exhaust system, which is included as standard. A new black trim strip between the tail lights characterises the rear-wheel-drive models. The light strip is reserved for the all-wheel-drive models. Sport Design exterior mirrors, 20-inch wheels with central locking device painted in silk-gloss black, plus GTS logos on the doors complete the side view. The characteristic Targa bar, which is supplied in black for the first time on the GTS, also lends the 911 Targa a particularly distinctive look.
New Porsche Track Precision app and high-quality equipment
GTS genes also shape the interior. The stopwatch of the Sport Chrono Package is integrated as a central component of the dashboard. The Porsche Track Precision app has been further enhanced specially to coincide with the market launch of the GTS models. Its features include automatic recording, detailed display and analysis of driving data on a smartphone. GTS passengers sit on Alcantara seats with a new stitching pattern. The Sports seats Plus with GTS logos on the headrests can be adjusted in 4-ways electrically and provide increased lateral support and comfort. Other features include brushed, black anodised aluminium trim strips on the instrument cluster as well as a high proportion of Alcantara, which can be found on the steering wheel rim, centre console and armrests, for example.
The 911 GTS models are available to order now; including value-added tax and country-specific equipment, prices in Germany are as follows:
911 Carrera GTS 124,451 euros
911 Carrera 4 GTS 131,829 euros
911 Carrera GTS Cabrio 137,541 euros
911 Carrera 4 GTS Cabrio 144,919 euros
911 Targa 4 GTS 144,919 euros