100% Original Factory anodized aluminum sheet/Coil for South Korea Factories
We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for 100% Original Factory anodized aluminum sheet/Coil for South Korea Factories, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
anodized aluminum sheet/Coil
|anodized aluminum sheet/Coil|
|A1050,A1060, A1070,A1100||0.2-100||20-2200||20-8000||O,H12,H22,H14,H16,H18, H24,H26,etc|
|A5052 ,A5005,A5083,A5754||0.2-100||20-2200||20-8000||O,H18,H24,H32,H34,H111,H112 ,etc|
|Packing : Export wooden pallets.|
|Standards:ASTM-B209. EN573-1, GB/T3880.1-2006|
|Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set|
|Application : Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect|
♦ alloy: :1060,1200,1100,3003,3004 etc.
♦ SGS & ISO
♦ Length: according to your requirements
The features of the anodized aluminum sheet
1. It is very glorious of the anodized aluminum sheet/coil which can be making the products more and more beautiful.
2. The anodized aluminum sheet can save so much time and save so many proceeds from the anodized aluminum sheets.
3. After anodized, the products are very clean also antifungal for the aluminum coil.
4. Anodizing aluminum can be used for so many industries such as the kitchens, Airplanes, Constructions, Electronic, Packing, Etc.
5. After anodized, it will be different kind’s surface and different colors for choosing.
6. Different surface for the anodized aluminum sheet, with different usage.
Custom Supercharged Honda Accord on VVSCV3 Deep Concave Vossen Rims… Whoa. ( Concept Car )
CT Engineering supercharger
Vossen VVS-CV3 wheels (matte black machined) – 20 x 9 (f); 20 x 10.5 (r)
Kumho tires – 245/30 (f); 275/30 (r)
Rotora brakes – (15-inch two-piece slotted front rotors, six-piston front calipers)
Power Slot (rear rotors, red painted calipers)
McGard tuner lug nuts (SPLine Cone Seat 12 x 1.5 inches)
BC Racing adjustable coil-overs
HFP (side underbody spoilers, front bumper underbody spoiler, rear bumper underbody spoiler)
Eurolite HID low beam headlights
Philips Crystal Vision Ultra Bright White high beam headlights (H11 CVS2)
Momo (Race Evo shift knob, Gotham racing pedals)
Sparco Chrono seats
Roadwire leather seat covers (f/r)
Philips LED lighting
Buy the supercharger here: https://www.ct-engineering.com/ProductLineup/HondaAccord/HondaAccordSuperchargerPackage/tabid/961/Default.aspx
CT Engineering has developed a Supercharger Kit for the TL/CL and Accord that increases power by 40 to 60 horsepower at the wheels depending on the model of car. The supercharger uses a “Eaton-type” design that provides consistent boost and compresses the intake charge efficiently with a minimal increase in the intake air temperature. This combination provides almost instant boost that increases low and midrange torque for excellent throttle response.
The kit is complete with cast aluminum supercharger manifolds, all mounting brackets, fuel pressure regulator, Ice Box air intake, all necessary hardware and is designed to provide excellent breathing. The kit requires no major modifications and the car can be easily returned to stock.
Let’s be clear up front: the 2012 Accord V6 is no slouch out of the box thanks to its 3.5-liter V6 that produces 271 hp. So, with an impressive powerplant already in place, the guiding principle for Team PASMAG for this build was to crank up the performance and enhance the car’s winning style at the same time with an awesome supercharger.
Some of the same partners that collaborated on the Remix Civic Si remain and new ones stepped forward. Under the hood, a CT Engineering supercharger pushed peak horsepower well beyond 300 horses with a Magnaflow stainless muffler and custom stainless exhaust allowing the fumes to escape quickly and with a throatier sound.
The focus then turned toward enhancing the Accord’s muscular look. Team IAC applied Frozen Grey paint with black trim to provide some contrast and style. A HFP body kit along with Eurolite HID low beams and Philips Crystal Vision Ultra Bright high beams also found their ways onto the car, which features a 20-inch Vossen VVS-CV3 alloy wheels with a matte black machined finish and Kumho rubber sized 245/30 and 275/30 in the front and rear, respectively.
The chassis received some attention as well thanks to fully-adjustable BC Racing coil-overs. The front brakes have been replaced with a Rotora big brake kit, which features six-piston calipers clamping down on 15-inch two-piece slotted rotors.
Team PASMAG chose to enhance the driver-oriented, performance feel of the Remix Accord 2.0 interior with some sharp style upgrades. The front and rear factory seats are covered with Roadwire leather seat covers while Momo contributed a shift knob and a set of its Gotham Racing pedals. Eurolite LED lighting is installed throughout the cabin, which has been geeked out by the Geek Squad experts at Best Buy in Toronto.
Augmenting the OEM stereo is a JBL GTO1004 four-channel amp featuring variable electronic crossover and bass boost. Driving some serious bass is a 10-inch Bazooka BTA10100FHC Amplified Basstube while JBL P660C 6.5-inch two-way components and a set of JBL GTO628 6.5-inch speakers surround the occupants with sound. BTAH provided all of the necessary cabling and hookups for constant power and true fidelity sound along with Dynamat sound deadening to optimize the acoustic experience.
JBL (GTO1004 600 Watt four-channel amplifier, P660C 6.5-inch two-way component speakers,
GTO628 6.5-inch two-way loudspeakers)
Bazooka BTA10100FHC 10” Amplified Basstube
AC Audio SOME-4 line output converter
iConnects USBCK1 USB car charger kit
Dynamat 19405 Xtreme trunk kit
Stinger SSCAP1M one-farad capacitor with digital voltmeter
5 Axis CNC Machine Cutting Aluminum Extrusions