Wholesale price stable quality 5000 Series Aluminum Plate for Nairobi Importers

Short Description:


Product Detail

FAQ

Product Tags

With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Wholesale price stable quality 5000 Series Aluminum Plate for Nairobi Importers, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.


This major series of this series aluminum plate provided by Mintai includes 5005, 5052, 5754, 5083 series.

5000 Series Aluminum Plate
♦ Width:500-2200mm
♦ Thickness:1-200mm
♦ Length:2000-8000mm
♦ Application:decoration, outer shell for household products
♦ Packing:blank waterproof paper , kraft, wooden case or pallet (fumigation report for the wooen packing material )
♦ Grade:5005 5052 5083 5086 5154 5182 5251 5754 etc.
♦ Features Very good elongation, anticorrosion performance

5000 Aluminum Plate Features
♦ The main ingredient of this series aluminum plate is magnesium element and the content is between 3% and 5%. It is also called aluminum magnesium alloy.
♦ With its low density, it features high tensile strength and elongation.
♦ This series aluminum plate is a commonly used and mature series in China.

5000 Aluminum Plate Applications
♦ With the same area of other series, the weight of this aluminum plate is lighter. As a result, it is used in aviation, such as in the fuel tanks in airplanes.
♦ It is widely used in conventional industries.
♦ This aluminum plate can be used in continuously casting and rolling. It can be hot rolled. As a result, it can be used in oxidation and deep processing.

Note:
Special dimensions can be produced according to your requirement

Hangzhou Jinding Aluminium Industry Co., Ltd.  is a professional manufacturer and supplier of 5000 aluminum plate based in China. We also offer aluminum coil, aluminium slit coil, aluminum sheet, coated aluminum coil, diamond aluminum tread plate,and more. Whenever you have a need for any of our products, please feel free to contact us.

  • Previous:
  • Next:
  • FAQ Content




  • Video tutorial on the four different methods how to remove rust. Rust, also known as iron oxide is a chemical reaction between iron and oxygen or moisture that occurs on bare metal. Beyond steel, rust can also form on lower grades of stainless steel. It is very important to remove any rust from metal when applying a finish as it can jeopardize that finish by causing premature failure. The methods to remove rust are not limited to this video are beyond cleaning it by hand with just a wire brush, sandpaper, or an abrasive pad. Methods shown are mainly based for at home methods which can be done in the comforts of your own driveway.

    Website: http://4diyers.com
    Facebook: https://www.facebook.com/4diyers
    Google Plus: https://plus.google.com/+4DIYers
    Twitter: https://twitter.com/4DIYers
    Instagram: https://www.instagram.com/4diyers/
    Tumblr: http://4diyers.tumblr.com
    Pintrest: https://www.pinterest.com/4diyers/

    Tools/Supplies Needed:
    -rust treatment (used in the video is Permatex Rust Dissolver Gel #80594)
    -rubber gloves (used in the video is Permatex Black 5 mil Nitrile Disposable Gloves #08184)
    -brush
    -cup
    -water
    -white vinegar
    -container
    -abrasive pad
    -sandblaster
    -blasting media (glass bead, copper slag, walnut shells, steel shot, aluminum oxide, etc)
    -air compressor
    -safety glasses
    -respirator
    -drill
    -angle grinder
    -hand held sander
    -rotary tool
    -sanding disks or pads
    -flap wheels
    -wire wheels
    -wire brush
    -sandpaper
    -grinding stone

    Procedure:
    Method #1
    -using a store bought solution which is a form of rust treatment
    -cleaning up any flaking paint, dirt, or loose rust using sandpaper or a wire brush
    -shake the bottle to ensure the solution is mixed, poor into a cup or container, then applying using a brush or sponge
    -do not allow it to come in contact with paint as it can cause damage
    -it takes abut 15-20 minutes for the rust to be converted
    -rinse with clean water
    -allow it to dry and apply more coats if needed
    -allow the metal to dry for 24 hours to ensure no moisture is trapped when applying a final finish
    -this will neutralize old rust and prevent new rust from forming as well

    Method #2
    -using white vinegar and submerging the parts in a container
    -clean up the piece slightly with either sandpaper or a wire brush
    -allow it to soak for a day or two, depending on the severity of the rust
    -once satisfied, rinse with water and give it a clean up using an abrasive pad
    -ensure it has dried overnight so there isn’t any moisture trapped in the surface
    -now you’re ready to apply a coating of your choice

    Method #3
    -using a sandblaster or some form of media blasting
    -there is a variety of blasting equipment along with media available on the market
    -normally a larger air compressor is required considering a sandblaster is a direct air loss
    -this will remove the rust with minimal work, access any pitted areas as well, and strip areas to bare metal

    Method #4
    -using a mechanical method such as power tools
    -there are a variety of tools that can be used such as a drill, angle grinder, hand held sander, rotary tool, etc
    -with these tools, you will have a variety of attachments or options such as grinding disks, sanding disks, sanding pads, abrasive pads, wire wheels, grinding stones, flap wheels, etc
    -in the video a hand held sander is used along with 180 grit sandpaper
    -unfortunately due to the pitting, the sandpaper is unable to reach those lower areas
    -sometimes an abrasive pad can tackle that, other times you will need to use a wire wheel

    Thank you to all those who watch my videos and support my content. Don’t forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!

    © 4DIYers 2013
    All Rights Reserved
    No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.



    The One Eleven ‘LP’ series truck boxes are made tough and have a reputation for quality & durability. A popular tool box that’s packed with features this aluminium box range comes fully welded for maximum strength and includes a rubber seal to help keep dust and water out. A popular storage box with trades people and the back of work vehicles it’s ideal for builders, carpenters, plumbers, electricians, farming, forestry, mining, construction, local government and much more. Choose from a range of sizes. visit www.1-11.com.au for more information on these aluminium storage boxes.

    Related Products