Rapid Delivery for 5083 marine grade aluminium plate to Switzerland Factory

Short Description:


Product Detail

FAQ

Product Tags

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
Rapid Delivery for 5083 marine grade aluminium plate to Switzerland Factory, We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!


 5083 marine grade aluminium plate

Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. 5083 has high resistance to corrosion, and is used in marine applications. It has the low density and excellent thermal conductivity common to all aluminium alloys.

 

Chemical Composition Limit Of Aluminum Alloys
ALLOY Si Fe Cu Mn Mg Cr Zn Ti Others Al
Each Total Min
5083 0.4 0.5 1.0 0.4-1.0 4.0-4.9 0.05-0.25 0.25 0.15 0.05 0.15 Remain

 

 

alloy 5083
temper H116 ,H321, O, H112 , H32,etc
thickness 1–300mm
length 1000–10000mm
width 1000-4000mm
surface condition mill finished
intergranular corrosion no greater than 15mg/cm²
exfoliation corrosion PB or better

Application

-  Ship board;

-  heatproof apparatus, material for interior and exterior of building;

-  Parts of Electronic tools;

-  Automobile Components.

  • Previous:
  • Next:
  • FAQ Content




  • Red: http://bit.ly/1jafDCf
    Green: http://bit.ly/1MX82TM
    UV: http://bit.ly/1MX879O

    The Larson Electronics HL-85-3W1 LED Pistol Grip Spotlight is an extremely rugged and effective LED spotlight designed to give users in operations a powerful, durable and easy to use source of LED light. This LED spotlight produces a light beam approximately 550’ long by 100’ wide and requires no tools for servicing, and runs off of any voltage from 9 to 32VDC.

    This light weight, LED spotlight is ergonomically designed to produce a well balanced and easily managed handheld LED light source that can withstand abuse under tactical conditions and operate with any voltage ranging from 9 to 32 volts DC. This light contains a single LED which is paired with a patent pending reflector design to produce an infrared light beam that reaches 550 feet in length and 100 feet in width. This pistol grip spotlight is designed for durability with a handle constructed of high impact nylon and an LED fully potted within a lamp assembly constructed of machined aluminum. The LED lamp assembly is protected by a thick Lexan lens and a detachable 16 foot coil cord with cigarette plug provides easy connection to any vehicle or equipment with a cigarette plug socket.

    This LED spotlight and the materials it is constructed from are water, UV ray, impact and vibration resistant and designed to be easily field serviceable. This unit requires no tools to remove any components and the internal connectors are accessed through a snap in base at the bottom of the handle.

    Versatile Power Options: This pistol grip LED spotlight operates on any voltage ranging from 9 to 32 volts DC. Each HL-85-3W1 comes with a detachable 16 foot coil cord with cigarette plug. The cord is detached via a weatherproof, 2 pin Deutsch connector which easily and securely attaches and detaches the coil cord from the spotlight. Other cords, including 21 foot cords with ring terminals (C-21RT), 16 foot cord with spring battery clamps (alligator clips) (C-16BC) and a 16 foot straight cord with cigarette plug (C-16CP) are available.

    Durability-Convenience: The HL-85-3W1 LED Pistol Grip Spotlight contains a single LED that is fully potted within a machined aluminum lamp housing and protected by a thick Lexan lens. This LED has an expected life span of 50,000+ hours and the entire LED lamp housing can be removed and replaced. This light is constructed of UV, water and impact resistant materials including a handle constructed of high impact nylon for extreme durability and resistance to damage from vibrations, shocks and impacts. The machined aluminum lamp housing is finished with an anodized coating for corrosion resistance. 16 gauge wiring is used to connect the internal components and can be accessed through a simple snap cover in the base.

    Versatility: The entire unit weighs only 14 ounces and comes with an included wrist lanyard for added carrying security. This light has a 3/8-16 inch brass nut fastener imbedded in the base of the handle to allow mounting this light to a tripod or magnetic base like our MM-2 or MM-5. We also offer permanent mount bases, which can be screwed into the base as well. This unit is fully field serviceable and requires no tools to disassemble or reassemble.

    #larsonlights



    http://www.nachi.tv Learn how to perform a home inspection according to the Home Inspector Standards of Practice with InterNACHI’s Ben Gromicko.

    Related Products