Manufacturer for Coated Aluminum Coil for UAE Factories

Short Description:

Product Detail


Product Tags

We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Manufacturer for Coated Aluminum Coil for UAE Factories, We warmly welcome merchants from home and abroad to call us and establish business relationship with us, and we will do our best to serve you.

This series coated aluminum coil provided by Mintai includes 1100, 1050, 1070 series, etc. The 1050, 1060 and 1070 series are representative series.

1000 Coated Aluminum Coil Features
♦ Alloy:1050 1060 1070 1100 1200 1235 etc.
♦ Temper:O,H12,H22,H14,H24,H16,H26,H18
♦ Thickness:0.20-100mm
♦ This coated aluminum coil, which is also called  prepainted aluminum coil, has the highest aluminum content among all the series produced by Mintai. Its aluminum content can be more than 99.00%.
♦ As no other techniques are involved in the production, the production procedure is single and the price is cheap. It is a commonly used coated aluminum coil in conventional industries.
♦ The last two numbers in serial number are used to determine the lowest aluminum content of this series. For example, in the 1050 series, the last two numbers are 50 and according to corresponding international standard, the aluminum content has to reach 99.5% or more. In GB/T3880-2006, the technical standard of aluminum alloy in China, 1050 series also means the aluminum content has to reach 99.5%. Similarly, the aluminum content of 1060 series coated aluminum coil has to reach 99.6% or more.

As a professional manufacturer and supplier of 1000 coated aluminum coil based in China, apart from coated aluminum coil, we also provide aluminum sheet, aluminium slit coil, aluminum strip, anodising aluminum sheet, diamond aluminum tread plate, aluminum coil, and more. For further information on any of our products, please feel free to contact us.

1000 Coated Aluminum Coil Appearance:
Cutting edge flat,clean, without burrs/raw edges/included side/ pyramid/bagginess/protruded tube core/arrow/layer covered/forward slash/bumping injury.

1000 Coated Aluminum Coil Appearance quality:
♦ Aluminum surface is very flat
♦ Aluminum surface is clean, with no corrosion freckled/grease stains/wrinkling/slotting/scratching/light or dark line/glue or roller vestige/vibration marks and diagonal.
♦ Aluminum foil is with no lightning spot/rolling mark/sand print and black line.
♦ Finished aluminium foil surface is without yellow grease stains/oil viscosity/bubbling and teared appearance.
♦ Surface wrinkle situation fit to state standard.

  • Previous:
  • Next:
  • FAQ Content

  • High frequency induction brazing welding for aluminum cookware capsule/sandwich bottom.
    Sun Glory Industry
    Sales office:
    Tel: 86-20-83649153 M.B.: 86-139 2217 4111
    Add: RM1501, Baihui Plaza, Zhongshan 5 Rd, Yuexiu District, Guangzhou, China
    WhatsApp/ Viber/ Chat on: 86-139 222 10559 Skype: Elena. Sunglory
    Factory: Mugang Ind. Zone, Mugang, Zhaoqing, Guangdong, China
    Alibaba: Website:

    Please find this product at
    This video is to bring you a closer look at the Pemko 2054A Mill Finish Aluminum Residential/Squareback Threshold.
    There is an image below this video showing everything important dimensionally about the item.
    The overall width is 4″, the height is 1-1/4″.
    A threshold like this would be a custom sort of solution for a specific situation (this a fairly tall threshold to get over).
    There may be situations where you might have a home where the carpeting was removed and there was a very large gap between the door and the floor, this threshold could help close off the gap.
    You could even add a door sweep mortised to the face of the door, so that it will close right up against the threshold.
    It is expected to be used in an exterior application, because Pemko has a vinyl boot in the bottom of the threshold which provides you with a moisture barrier.
    You can also select a water pan (piece of sheet metal or bass, thin gauge material) with this threshold.
    The water pan will sit underneath the threshold and act as a barrier between water and the top of the sill that this is sitting.
    This will help prevent the deterioration of the sill if water was an issue.
    Available in two colors (aluminum & dark bronze).
    The ‘A’ stands for the aluminum.
    Screws are included (#10 x 2″ flat head screws in a complimentary finish).
    Only available in two lengths (36″ and 72″).
    This is easily cut with a miter box saw.
    If you have need for a longer length than 36″ you’ll have to order the 72″ and cut it.
    A threshold like this will be more for a custom application rather than for new construction.
    Pemko is a full-line manufacturer of all things weatherstripping related, not just commercial, but residential as well.
    They also provide sliding door hardware and continuous hinges.
    If you have any questions on the Pemko 2054A Mill Finish Aluminum Residential/Squareback Threshold or any other product by Pemko please feel free to reach out to us.

    Related Products