Manufactur standard 5083 marine grade aluminium plate for Casablanca Importers

Short Description:


Product Detail

FAQ

Product Tags

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Manufactur standard 5083 marine grade aluminium plate for Casablanca Importers, We will supply best quality, the most market competitive price, for every new and old customers with the most perfect green services.


 5083 marine grade aluminium plate

Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. 5083 has high resistance to corrosion, and is used in marine applications. It has the low density and excellent thermal conductivity common to all aluminium alloys.

 

Chemical Composition Limit Of Aluminum Alloys
ALLOY Si Fe Cu Mn Mg Cr Zn Ti Others Al
Each Total Min
5083 0.4 0.5 1.0 0.4-1.0 4.0-4.9 0.05-0.25 0.25 0.15 0.05 0.15 Remain

 

 

alloy 5083
temper H116 ,H321, O, H112 , H32,etc
thickness 1–300mm
length 1000–10000mm
width 1000-4000mm
surface condition mill finished
intergranular corrosion no greater than 15mg/cm²
exfoliation corrosion PB or better

Application

-  Ship board;

-  heatproof apparatus, material for interior and exterior of building;

-  Parts of Electronic tools;

-  Automobile Components.

  • Previous:
  • Next:
  • FAQ Content




  • EXTRUSION LINE FOR BIG SIZE MULTILAYER PPR PIPES WITH GLASS FIBER
    www.amut.it

    Diameter up to 630 mm for the production of multilayer-pipes in PP with glass fiber: this is the line sold by AMUT to a primary European pipe producer dedicated to hot and cold water ducting for civil and industrial applications.

    The glass fiber improves the elastic module of the pipe reducing the thermal expansion. Pipe installation costs are lower than the ones for traditional pipe because pipe support is reduced during installation. The quality of pipes is generally enhanced.

    The line is composed by 3 single screw extruders, EA75 AMUT model, L/D 35:1 and 1 co-extruder EA20 for the coloured strips. The extruder for inner layer is equipped with anti-abrasion high quality treatment screw and barrel to process properly the glass fiber.

    The line is equipped with a special head designed for processing big-size pipes and different configurations: 3-layer with spiral-helical distribution system. The head is thermoregulated through a dedicated TCU keeping accurate temperature during the production process (TERAX system). Any sagging effect is avoided and perfect uniformity of the thickness can be maintained.
    Every extrusion tool is designed to reduce the time required for pipe dimensional changes.

    The pipe head is equipped with INRAF system for the internal cooling of the pipe. This energy saving concept allows the reduction of the number of cooling tanks, improving the dimensional quality of the pipe.

    An integrated computerized system (SURVEYOR) controls all the parameters during each phase of the production process. An innovative software manages the action of the vacuum pumps and save energy by reducing operating time.

    Mailto: info@amut.it



    handmade alloy cafe racer tank build (part 2)

    Related Products