Hot Selling for Coated Aluminum Coil to moldova Manufacturer

Short Description:


Product Detail

FAQ

Product Tags

Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Hot Selling for Coated Aluminum Coil to moldova Manufacturer, We believe that a passionate, innovative and well-trained team will be able to establish good and mutually beneficial business relationships with you soon. Please feel free to contact us for more details.


This series coated aluminum coil provided by Mintai includes 1100, 1050, 1070 series, etc. The 1050, 1060 and 1070 series are representative series.

1000 Coated Aluminum Coil Features
♦ Alloy:1050 1060 1070 1100 1200 1235 etc.
♦ Temper:O,H12,H22,H14,H24,H16,H26,H18
♦ Thickness:0.20-100mm
♦ This coated aluminum coil, which is also called  prepainted aluminum coil, has the highest aluminum content among all the series produced by Mintai. Its aluminum content can be more than 99.00%.
♦ As no other techniques are involved in the production, the production procedure is single and the price is cheap. It is a commonly used coated aluminum coil in conventional industries.
♦ The last two numbers in serial number are used to determine the lowest aluminum content of this series. For example, in the 1050 series, the last two numbers are 50 and according to corresponding international standard, the aluminum content has to reach 99.5% or more. In GB/T3880-2006, the technical standard of aluminum alloy in China, 1050 series also means the aluminum content has to reach 99.5%. Similarly, the aluminum content of 1060 series coated aluminum coil has to reach 99.6% or more.

As a professional manufacturer and supplier of 1000 coated aluminum coil based in China, apart from coated aluminum coil, we also provide aluminum sheet, aluminium slit coil, aluminum strip, anodising aluminum sheet, diamond aluminum tread plate, aluminum coil, and more. For further information on any of our products, please feel free to contact us.

1000 Coated Aluminum Coil Appearance:
Cutting edge flat,clean, without burrs/raw edges/included side/ pyramid/bagginess/protruded tube core/arrow/layer covered/forward slash/bumping injury.

1000 Coated Aluminum Coil Appearance quality:
♦ Aluminum surface is very flat
♦ Aluminum surface is clean, with no corrosion freckled/grease stains/wrinkling/slotting/scratching/light or dark line/glue or roller vestige/vibration marks and diagonal.
♦ Aluminum foil is with no lightning spot/rolling mark/sand print and black line.
♦ Finished aluminium foil surface is without yellow grease stains/oil viscosity/bubbling and teared appearance.
♦ Surface wrinkle situation fit to state standard.

  • Previous:
  • Next:
  • FAQ Content




  • Metal Roof Coatings / Liquid Rubber – Video Showing Scope of Work.

    Our new metal roof coating video gives you an inside look at every detail from start to finish of roof preparation and application our crews perform when coating metal roofs with liquid rubber.

    Metal Roof Coating: “Scope of Work”, “Table of Contents”, and “About Metal Roof Coatings” included in description below.

    +1.877.497.3528 | info@grscanadainc.com | www.grscanadainc.com

    Metal Roof Coatings Edmonton, Calgary, Red Deer, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. Alberta, British Columbia, Saskatchewan, Manitoba, Ontario.

    #MetalRoofCoatings #MetalRoof #LiquidRubber 

    Metal Roof Coatings Scope of Work:
    Engineered liquid rubber recovery to complete metal roof. Pressure wash to clean, water test, and assess. Test and replace fasteners as required to complete roof deck, penetrations, and gutters. Sheet metal repair and penetration saddle fabrication as required. Remove old caulking as required. Hand trowel all penetrations, roof to wall connections, all fasteners, ridge, horizontal sheet seams, hidden gutters (if present), and roof edge at external gutters with mesh and high grade rubber as required. Apply liquid rubber coating, allow cure time, repeat hand trowel process above, and apply second coat liquid rubber (if spray grade, if roll grade one coat). Ten Year Manufacturer Warranty Extendable to Twenty Year GRS Maintenance Agreement.

    About Metal Roof Coatings
    Generally speaking, metal roof systems are constant aggravating roof structures. Industrial metal roof systems have a deficient design – they are water-shedding and not water-proofing coverings. Metal expands and contracts more than any other roofing material. Metal roofs tend to leak from expansion and contraction and ice / snow loads. Leaks are intermittent at seams (vertically where sheets are seamed together and horizontally where seams between sheets meet), penetrations (stacks, roof-top unit curbs, etc.), fasteners (fastener holes get larger with expansion and contraction), around the perimeter as ice back-ups at gutters and then under eave (hidden and external gutters have the same ice back up melt issue causing leaks), and at joints between roof and wall connections. Metal rust / corrosion may start at places, the seams and fasteners are vulnerable from expansion / contraction and snow loads, and any traditional caulking or coating won’t last more than a few seasons at best.

    Remedies are either spot repairs-maintenance with caulking or more extensive maintenance which involves engineered coatings. Our recommendation is a high end engineered liquid rubber polymer coating that carries a 10 Year Manufacturer Warranty and has option to a twenty year GRS maintenance contract for extended leak protection.

    General Roofing is considered a pioneer and leader in engineered roof coatings; (www.liquidrubber.ca, https://www.grscanadainc.com/Roof_Coatings.html, https://www.grscanadainc.com/Liquid_Rubber.html). We have significant liquid rubber operations specifically serving commercial and industrial facilities with low slope metal roofs. We are responsible for many hundreds of thousands of square feet of engineered roof coatings each year.

    Our engineered coating clients and/or jobs site locations include companies such as Imperial Oil, Shell Oil, Husky, Telus, Fortis, Alberta Infrastructure, Transforce, Canadian Freightways, Credit Union, National Oil Well Varco (NOV), Teck Resources, Enbridge, Encana, Enerflex, TransAlta, Kiewit, Pembina, Telus, AltaLink and many more. (https://www.grscanadainc.com/Project_Portfolio.html).

    View complete detailed scope of work description / table of contents for video at this link:

    https://www.grscanadainc.com/Metal_Roof_Coatings.html

    Join us on our Metal Roof Coatings Face Book Page https://www.facebook.com/pages/Metal-Roof-Coatings/512855468858540?ref=hl

    Contact us at +1.877.497.3528 or info@grscanadainc.com.



    China Hefei Jotun Machinery
    www.jotunpolishing.com
    sales04@jotunmachinery.com
    ===============================================
    JT-1Tank/cylinder buffing polisher is suitable for all kinds of stainless steel tanks,industrial tanks/vessels,tank shell to polish the inside and outside of Cylinder and also used to polish the inside and outside,surface finish of pressure vessel and industrial container and the circumferential weld processing.
    The tank polishing machine is extensive apply for the polishing of work piece in the range of medical,chemical,environmental purification,Food and beverage, water filtration etc.
    ============================================
    Main Application Filed:
    1,Pressure vessel industry. 2,Medical industry.
    3,Chemical industry. 4, Food industry.
    5,Pipeline corrosion protection industry. 6, End socket producing industry.

    Related Products