Free sample for PVDF Coated Aluminum Coil to Swiss Manufacturer

Short Description:


Product Detail

FAQ

Product Tags

With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for Free sample for PVDF Coated Aluminum Coil to Swiss Manufacturer, We are also constantly looking to establish relationship with new suppliers to provide innovative and smart solution to our valued customers.


Coated Aluminum Coil
The coated aluminum coil is ideal for producing aluminium composite materials. Zhejiang Shuanglin Jiate Metal Technology Company’s  aluminium coil is coated with high quality fluororesin paint which offers good weather resistance.

Where can coated aluminum coil be used?
♦ To produce aluminium composite panel or aluminum veneers.
♦ Used in exterior applications for decoration and protection of exterior wall, canopy, roof and pillar, etc.
♦ Coated aluminum coil is also ideal for interior decoration for wall, ceiling, bathroom and kitchen, etc.
♦ Used in advertising boards or shop front decoration.

Packing
♦ Inner Core: Paper Tube
♦ Outer: Paperboard
♦ Wooden Pallet

As a one of the foremost coated aluminum coil manufacturers and suppliers in China, all coated coils are painted by ALUMAX own coating production line. We can produce different aluminium coil coming with different types of coating, including, PVDF coated, polyester coated, brushed and chromated cleaning coils. Given below are the detailed specifications for your reference.

PVDF coated aluminum coil

Aluminum Alloy AA1100; AA3003; AA5005
Coil thickness 0.25mm,0.30mm,0.40mm,0.50mm
Coil width 1240mm, 1270mm, 1520mm, 1550mm, 1575mm
Coating thickness Over 25 micro
Diameter 405mm, 505mm
Coil weight 2.5 to 3.0 tons per coil
Color White series, metallic series, Dark series, Gold series( accept color customs)

Polyester coated aluminum coil

Aluminum Alloy AA1100; AA3003; AA5005
Coil thickness 0.18mm,0.21mm,0.25mm,0.30mm,0.40mm,0.45mm,0.50mm
Coil width 1240mm, 1270mm, 1520mm,
Coating thickness Over 16 micro
Diameter 405mm, 505mm
Coil weight 2.5 to 3.0 tons per coil
Color White series, metallic series, Dark series, Gold series( accept color customs)

Brush finish aluminum coil

Aluminum Alloy AA1100; AA3003
Coil thickness 0.15mm, 0.21mm, 0.30mm, 0.40mm, 0.50mm
Coil width 1240mm, 1270mm, 1520mm,
Diameter 405mm, 505mm
Coil weight 2.5 to 3.0 tons per coil
Color Silver & gold

Clean chromated aluminum coil

Aluminum Alloy AA1100; AA3003
Coil thickness 0.15mm, 0.21mm, 0.25mm, 0.30mm, 0.40mm, 0.45mm, 0.50mm
Coil width 1240mm, 1270mm, 1520mm,
Diameter 405mm, 505mm
Coil weight 2.5 to 3.0 tons per coil

Our product is coated with high-performance fluorocarbon, polyester, polyurethane and epoxy coating, and is widely used for roofs, facade cladding, ceilings, aluminum curtains, composite panels, pipe wrap, advertisement plates, instrument panels, and other uses.
In addition to various coated aluminum coil, we can also provide aluminum composite panel, aluminum ceiling, and sandstone tile, etc. All products are widely used in the United States, Australia, Russia, Iran, and Japan.
If you are searching for coated aluminum coil or related products, please feel free to contact us. We are ready to serve you.

  • Previous:
  • Next:
  • FAQ Content




  • With age, the oil cooler seal becomes flat & brittle… eventually cracking causing a fairly big / quick oil leak from above the oil filter / oil cooler.

    The best way to replace the seal, is to remove the oil filter, the oil pipe and then lower the oil cooler to gain access to the seal.

    25Nm for the oil cooler nut.

    http://fkh161.ca/



    I will demonstrate how it’s possible (step by step) to get a Super Hi Gloss PAINT FINISH using RustOleum Oil based paint. It’s a little bit of work however the end result is stunning.
    So with out any further delay let’s jump right in.
    The first thing that needs to be done after the area you desire to paint is prepped and taped off with paper/masking tape is to gather your supplies. You will need Rustoleum Oil Based gloss paint.(Has to be oil based) This can be purchased from most hardware stores for about $10 a quart or $30 a gallon. You will need a small bottle of Mineral Spirits from that same hardware store, also is about $10 a quart OR $20 a gallon. You will need a few QUALITY paint brushes (HARBOR FREIGHT HAS GREAT BRUSHES FOR CHEAP FYI ) OR try a 5 pack of 4 inch Ultra-dense foam roller’s for about $9 bucks. You might want to experiment with what works good for you. If you’re painting a car/boat then the foam roller’s might be the way to go. IF YOU CAN Spray using a HVLP GUN, then go that route, its simple to do and by far the easiest. Spray a test piece before you spray the area you desire to paint to adjust the flare and pressure & remember a bunch of light coats is BEST to build up the paint rather than a few thick coats.(THAT’S WHY WE THIN IT DOWN SO MUCH)
    OKAY Now lets get to the basics. First stir your paint thoroughly & find a container to work out of (I used a old glass dill relish jar) Try to only mix what you will need for 1 day. Add roughly 40% mineral spirits to the container & 60% Rustoleum paint and mix that real good. (1/3 mineral s. & 2/3 paint is fine for a bit thicker mix). Pre Wipe the area that is getting painted using a clean rag & mineral spirits to ensure there isn’t any wax or dust on the surface. Dip your brush (if that’s what you’re using) in mineral spirits 20% of the way down then flick the brush to remove most of the liquid from the brush and now you’re ready to go. ( if using a roller then moisten the foam with mineral spirits)
    Now that you’re ready to go keep in mind that no matter what happens from here on out can always be redone & fixed if things don’t work out. It took me 6 weeks to paint a boat back in ’09 because of the learning curve but it finally came out SWEET with out any orange peel (looks like fish scales in the finish) & after I tried to use a hi density foam roller I figured out spraying was the easiest way to accomplish the results I desired. WOW, That was a lot of work. As you can see I still use a brush because it’s so easy to work with & This was a small project anyway.
    So just like I mention in the video when you begin working with the paint spread the paint around (doing a small area at a time) and then begin working the paint (what I refer to as combing your paint) On a edge either paint towards the edge and fall off or when painting away from a edge begin the stroke 1/4″ from the edge & follow up by doing the reverse & paint off the edge. Vertical surfaces are some what difficult because the paint wants to run. Just remember you have a 4-5 minute work time with this method so always watch what you painted a few minutes prior to what you are currently doing and simply go back & repaint/remove the run. Also I haven’t gotten to that yet but any paint runs will be wet sanded out. So let’s get to the method.
    Apply 4 light coats of paint (WAITING HOURS INBETWEEN COATS) then wet sand using 600 grit.(IT MAY TAKE A FEW COATS TO GET A SOLID COVERAGE) Apply 4 more coats then wet sand using 800 grit. Apply 4 more coats then wet sand using 1000 grit. If it looks good then polish the areas with turtle wax brand POLISHING COMPOUND in the green container ( NO WAX YET) Wait for a few weeks to cure then wax all your paint using whatever wax you have on hand or use turtle wax. You can get a polishing pad for a drill motor for about $7, see my next video for the polish & waxing demonstration.
    Hope this was helpful & feel free to shoot me any questions/ comments & perhaps tips & pointers. I’m always open to hear a new idea. Remember i’m not exactly a paid pro painter.

    Related Products