factory wholesale good quality Aluminum Checker Plate Coil to Malta Factories
Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for factory wholesale good quality Aluminum Checker Plate Coil to Malta Factories, We warmly welcome all interested customers to contact us for more information.
Aluminum checker plate coil
Aluminum Checker Plate aslo named as Aluminum chequer plate,Aluminum checkered plate.It is easy to fabricate and its raised diamond ,bar,pointer,lug pattern provides good slip resistance.Which has good forming, drilling and welding abilityis and widely used in decorative, shipbuilding and architectural applications.
?Alloy:1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc.
?Temper:H14/H154 H24/H254 H26/H274 H18/H194 H32/H334 etc.
?Thickness:0.03″ – 0.28″ (0.8mm – 7mm)
?Width:100mm -2600mm ?Length:According to customer’s request
Features of Aluminum Checker Plate (Aluminium chequer plate,Aluminum checkered plate)
Light in weight
Pattern of Aluminum Checker Plate (Aluminum chequer plate,Aluminium checkered plate)
big 5 bar
small 5 bar
Diamond pattern Aluminum checker plate 5 bars pattern Aluminum checker plate
Applications of Aluminum Checker Plate (Aluminum chequer plate,Aluminium checkered plate)
- ?Loading Ramps
- ?Stair Tread
- ?Dock Plate
- ?Dock Board
- ?Decorative purposes
- ?Fire Trucks
- ?Recreational Vehicles
- ?Car Rear Bumper Protector
- ?Ship deck
- ?Workshop floors
- ?Building floors and steps
- ?Antiskid floor of bus
- ?Stair tread
- ?Vehicle step
- ?Amusement park
- ?Cabinet facing
- ?Ceiling fan
- ?Hot rod
- ?Wall accent
Restaurant service area
Checker plate used in stair treads Checker plate used in the ceilingPackaging of Aluminium Checker Plate (Aluminium chequer plate,Aluminum checkered plate)
Our Products are packed and labeled according to the regulations and customer’s requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
Aluminium checker plate
As a professional manufacturer and supplier of aluminium checker plate based in China, we also provide aluminium strip, aluminium slit coil, anodising aluminum sheet,aluminium sheet,and more.Our products have exported to Argentina, Australia, New Zealand, USA, Brazil, Chile, Fiji, Mexico, Germany, UK, Italy, Czech, Saudi Arabia, UAE, Iran, Iraq, Bangladesh, India, Sri Lanka, Viet Nam, Japan, Korea, Singapore, Indonesia, Philippines, South Africa etc more than 50 countries. Whenever you have a need for any of our products, please feel free to contact us .
What is COIL COATING? What does COIL COATING mean? COIL COATING meaning – COIL COATING definition – COIL COATING explanation.
Source: Wikipedia.org article, adapted under https://creativecommons.org/licenses/by-sa/3.0/ license.
Coil coating is the continuous and highly automated industrial process for efficiently coating coils of metal. Because the metal is treated before it is cut and formed, the entire surface is cleaned and treated, providing tightly-bonded finishes. (Formed parts can have many holes, recessed areas, valleys, and hidden areas that make it difficult to clean and uniformly paint.) Coil coated metal (often called prepainted metal) is often considered more durable and more corrosion-resistant than most post painted metal.
Annually, 4.5 million tons of coil coated steel and aluminum are produced and shipped in North America, and 5 million tons in Europe. In almost every five-year period since the early 1980s, the growth rate of coil coated metal has exceeded the growth rates of either steel and/or aluminum production.
The definition of a coil coating process according to EN 10169 : 2010 is a ‘process in which an (organic) coating material is applied on rolled metal strip in a continuous process which includes cleaning, if necessary, and chemical pre-treatment of the metal surface and either one-side or two-side, single or multiple application of (liquid) paints or coating powders which are subsequently cured or/and laminating with permanent plastic films’.
The metal substrate (steel or aluminum) is delivered in coil form from the rolling mills. Coil weights vary from 5-6 tons for aluminum and up to about 25 tons for steel. The coil is positioned at the beginning of the line, then unwound at a constant speed, passing through the various pre-treatment and coating processes before being recoiled. Two strip accumulators at the beginning and the end of the line enable the work to be continuous, allowing new coils to be added (and finished coils removed) by a metal stitching process without having to slow down or stop the line.
Available coatings include polyesters, plastisols, polyurethanes, polyvinylidene fluorides (PVDF), epoxies, primers, backing coats and laminate films. For each product, the coating is built up in a number of layers.
Primer coatings form the essential link between the pretreatment and the finish coating. Essentially, a primer is required to provide inter-coat adhesion between the pretreatment and the finish coat and is also required to promote corrosion resistance in the total system. The composition of the primer will vary depending on the type of finish coat used. Primers require compatibility with various pretreatments and top coat paint systems; therefore, they usually comprise a mixture of resin systems to achieve this end.
Backing coats are applied to the underside of the strip with or without a primer. The coating is generally not as thick as the finish coating used for exterior applications. Backing coats are generally not exposed to corrosive environments and not visible in the end application.
Prepainted metal is used in a variety of products. It can be formed for many different applications, including those with T bends, without loss of coating quality. Major industries use prepainted metal in products such as building panels, metal roofs wall panels, garage doors, office furniture (desks, cubicle divider panels, file cabinets, and modular cabinets), home appliances (refrigerators, dishwashers, freezers, range hoods, microwave ovens, and washers and dryers), heating and air-conditioning outer panels and ductwork, commercial appliances, vending machines, foodservice equipment and cooking tins, beverage cans, and automotive panels and parts (fuel tanks, body panels, bumpers), The list continues to grow, with new industries making the switch from post-painted to prepainted processes each year.
High Speed Aluminum Cutting, Thin Wall