Factory wholesale Custom Aluminum Sheet, Embossed Aluminum Sheet to Mexico Manufacturers

Short Description:


Product Detail

FAQ

Product Tags

We strive for excellence, service the customers", hopes to become the best cooperation team and dominator enterprise for personnel, suppliers and customers, realizes value share and continuous promotion for Factory wholesale Custom Aluminum Sheet, Embossed Aluminum Sheet to Mexico Manufacturers, Standing still today and looking into the future, we sincerely welcome customers all over the world to cooperate with us.


 

 

 Basic information

 

 

Embossed Aluminum Sheet, Aluminum Embossed Sheet, Stucco Embossed Sheet,Diamond Embossed Sheet

      Grade and Temper

Alloys: 1050, 1100, 3003,3004 3005, 3105, 5005, 5052, 6061,60838011,etc Temper: 0-H112

Width

30mm to 1800mm

Thickness

0.04mm to 2.0mm

Treatment 

 Embossed

Coil Specifications

I.D.:  150mm,300mm,405mm, 505mm

O.D.:  300mm – 1270mm

Packing Detail

Wooden pallet either eye to wall or eye to sky

Application

Deep Freezer,Ice Chest,refrigerating cabinet,Automobile interior equipment, Tool boxes for pick up trucks, Lift, Building decoration

 

 Surface Quality:

 Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks and other defect which will interfere with use.

 

Mechenical Property:

Chemical Composite and Mechanical Property are meted with GB/T, ASTM, ENAW, and JIS Standard.

 

Packing:

 First, plastic cloth; Second, Pearl Wool; Third, wooden cases with dry agent, without fumigation, wooden pallets.

 

Certificate:

  ISO9001:2008, SGS and ROHS (if client request, paid by client), MTC (plant provided), Certificate of Origin (FORM A, FORM E, CO)

 

  • Previous:
  • Next:
  • FAQ Content




  • Please find this product at http://absupply.net.
    This video is to bring you a closer look at the Pemko 184AT Mill Finish Aluminum Commercial Threshold Stop Strip.
    It is a solid piece of aluminum with a solid thermo seal strip.
    The extrusion features a slot where the thermo seal will slide into.
    A threshold stop strip like this are used for many different sorts of conditions.
    You could have an undercut below the door that is so small that you don’t have room for a threshold but you still want to keep some barrier to the elements (you can install this product).
    This is also very commonly used on top of a saddle-type threshold, you screw it straight down.
    Usually you don’t see these on new installations, these are generally sold when a bump-up feature needs to be added to an existing installation.
    Below this video is an image showing everything important dimensionally about the item.
    It is 3/8″ thick, the width of the extrusion only is going to be 5/8″, you’ll have a 1/4″ projection of the thermo seal.
    Includes 1032 flat head machine screws (thread cutting screws).
    You can tell these screws are intended to go down to an existing sill (aluminum).
    Available on the website in several different lengths.
    If you have need for a custom length by all means let us know by ordering the next longest piece or pieces and indicating in the comment field what size you’d like for us to cut the item back to.
    The reason for this is if you had to cut this 3ft piece down to 30″, you’d eliminate that counter-sink and the next counter-sink is farther down on the item.
    If you order a custom length we will not only locate the holes in the proper dimension from the edge, but also the proper center to center as well.
    Available in different finishes as well.
    Pemko is a full-line manufacturer of all things weatherstripping.
    If you have any questions on the Pemko 184AT Mill Finish Aluminum Commercial Threshold Stop Strip or any other product by Pemko please feel free to reach out to us.



    Supply economic gas nitriding furnace, impulse gas nitriding furnace, vacuum nitriding furnace, frequency conversion nitriding furnace, automatic hydrogen analysis type nitriding furnace.

    We have three kinds of nitriding furnace:
    1. Normal type, mean operation by manual. Structure is sample and easy to maintain; the furnace structure can meet the extrusion dies nitriding process requirement. If you want to reduce the machine cost, this is a good choice.
    2. Vacuum impulse type, mean it is equipped with Vacuum Impulse system, during the process of nitriding, the system is automatic, but the temperature setting for start is manual type. Furnace temperature is controlled by temperature control system, temperature control is controlled by temperature control closed-loop which is made of thermocouple, temperature control meter and Power regulator (PID). Control cabinet setup with overheat alarm, Digital instrumentation equipped an intelligent PID for temperature control precision of ±1℃ and with the function of self-turning, self-adopting, overload, over pressure audible and visual alarm, power-off protection, eight-section temperature option, heat preserving technological curve and so on.
    3. With PC and Nitrogen control instrument and hydrogen analysis meter to achieve automatic control the nitrogen potential, no need to adjust the temperature and ammonia gas.
    In addition, the furnace can be equipped with advanced and stable power regulator.This system is manly used for adjusting the power according to actual production requirements and based on stable operation performance for save electricity energy. (If you need this system, please notice it when you send us inquiry)
    The extrusion die works at the condition of strong extrusion force and high temperature, it needs to stand the very strong friction. So after the extrusion die used a certain time, it need to use the nitriding furnace to do hardening process.
    We are specialized in the production of gas nitriding for hardening aluminum extrusion die, we have been exported to Pakistan, Egypt, Sri Lanka, we have rich experience of aluminum extrusion die treatment, we can supply the process treatment guidance.
    The extrusion die works at the condition of strong extrusion force and high temperature, it needs to stand the very strong friction. So after the extrusion die used a certain time, it need to use the nitriding furnace to do hardening process.
    For more details, welcome to contact: info@fsnenghong.com
    We are specialized in the production of gas nitriding for hardening aluminum extrusion die, we have rich experience of aluminum extrusion die treatment, we can supply the process treatment guidance.
    For more details, welcome to contact: info@fsnenghong.com
    Mobile: 0086-15813431757 (WhatsApp, Viber, Wechat)

    Related Products