Factory directly provide big 5-bar Aluminum Tread Plate for Kuala Lumpur Importers

Short Description:

Product Detail


Product Tags

To be the stage of realizing dreams of our employees! To build a happier, more united and more professional team! To reach a mutual benefit of our customers, suppliers, the society and ourselves for Factory directly provide big 5-bar Aluminum Tread Plate for Kuala Lumpur Importers, We look forward to establish a long-term business relationship with your esteem co-operation.

  • Previous:
  • Next:
  • FAQ Content

  • http://GoRambling.com

    Discover more free ideas at my website today :)

    My wife and I are planning on building a vertical log cabin, often referred to as a stockade style log cabin. Here are some pictures to give you an idea. Here’s one…here’s another, and here you go.

    Anyway we’ll be moving to Alaska, probably near the Kenai Peninsula or Matanuska Valley. Of course we’re going to try and avoid permafrost, but who knows exactly what kind of land we’ll buy.

    Our vertical log cabin in Alaska will be constructed on concrete posts that’ll be poured into Sonotubes that are buried below the frost line (probably around 40 to 50 inches underground).

    And then the posts will come up about 18 inches into the air…at which point we’ll begin the cabin. So yes, the cabin will be raised about 18 inches off the ground.

    Anyway, I have no experience to build anything of this magnitude, but this doesn’t scare me. My wife and I look forward to the challenge. So needless to say, I have a lot of questions, lots more research to do, and plenty of planning that awaits us.

    I’m posting this video to present my plan for the concrete posts and the insulated floor that will sit atop these 10 concrete posts.

    First, here is my rough sketch for our small vertical log cabin. It’s 10 feet by 35 feet. I’ve kind of modeled it after an RV, so I call it our RV cabin. It seems like it’ll be a nice comfortable cabin that will serve us well. And it seems like it’ll be somewhat easier to build than other plans.

    Anyway, I’ll make another video later on and go over the interior and how everything will be laid out.

    Okay…so here is my plan for the concrete posts and the insulated cabin floor.

    1)The grass (or the ground). We’ll start by clearing the ground and marking off the perimeter of the cabin, making sure the 90 degree angles are correct.

    2)We’ll dig our holes for the concrete posts and fill the bottoms with about 6 to 12 inches of gravel.

    3)Then we’ll insert our Bigfoot footing that has

    4)…the 12 to 18 inch diameter cardboard Sonotube, and then will fill them both with concrete.

    5)We’ll make sure to insert 3 rebar bars before the pouring. What size rebar is best? Thoughts?

    6)The sill bolt will go into the Sonotube before pouring and the bolt will stick out about 6-12 inches.

    So after we pour the concrete, we go on to…

    7)This is the part I’m a little unsure about it. Should we put down some kind of thick plastic sheeting that will be directly in contact with the elements, or should we apply some kind of coating to #8, the bottom subfloor)? Would polyurethane work?

    8)So the bottom subfloor will be hooked onto the sill bolts. I’m guessing we should drill a hole in the bottom subfloor sheet of wood, and then just hook the board to all of the sill bolts. Right?

    9)This sill log will be a 3-sided log (here’s a picture) And we’ll mill this sill log with an Alaskan saw mill…which is an attachment to a chainsaw.

    10)So here we’ll put in the floor joists by attaching them to the sill log by means of a gain and tenon fit. And then we’ll put in the insulation.

    11)Here we’ll nail on the top subfloor. Should we put any kind of coating on this? Polyurethane?

    So after we erect the vertical logs complete with the roof, we’ll add #12, the carpet.

    Okay? So what do you think? Please don’t be shy about your critique! I can handle constructive criticisms! Thanks a lot and please leave a comment if you have any thoughts about our plan.


    contact:reppart@126.com, kingsward@hotmail.com
    Reppart Group is a machinery supplier from China.
    We supply various machinery for industrial production,including complete plant equipment,such as full set of machines for fan guard making,refrigeration compressor making,condenser/evaporator production,metal cabinet making,Aluminium profile extrusion,electric wire/cable production,plastic products production,etc.We are able to provide complete technology solution. We also supply marine products with CCS/LR/DNV/ABS certificate,such as shaft,propeller, rudder,rudder stock.alibba ID:reppart1.Just tell us what product you want to make, and quantity,size, raw material,and standard if you know.

    Related Products