6 Years Factory 3003 Aluminum Plate to Sudan Factory
We not only will try our best to offer excellent services to every customer, but also are ready to receive any suggestion offered by our customers for 6 Years Factory 3003 Aluminum Plate to Sudan Factory, We are looking forward to establishing long-term business relationships with you. Your comments and suggestions are highly appreciated.
3003 Series Aluminum Plate Specifications
3003 Aluminum Plate Features
♦ This series aluminum plate is anticorrosive and its production technology is good.
♦ The main ingredient in it is manganese element and the content is between 1.0% and 1.5%.
3000 Aluminum Plate Applications
As a result of it good property in anti-corrosion, this series aluminum plate is commonly used in moist environments like air conditioners, refrigerators, the bottom of cars.
3000 series aluminum Plate are widely used in construction,decoration,pipe, packing,automobile,air condtioning,pot,containers,refrigeration,electrical and electronic products, etc.
With Plain, five bar, stucco, diamond, or mirror surface process, Or coated with PE, PVDF, BRUSH etc. There is (CC) cold rolling and (DC) hot rolling Line.
|plate||3003||O H12 H14 H16 H18||0.3-0.5mm,
|Kithenware,food /chemical processing storage device|
|3004||thin aluminum plate work pieces,
Building equipment ,storage device
|3105||Baffles ,cap ,etc.|
Jinding is a professional manufacturer and supplier of 3003 aluminum plate based in China. We also offer aluminum coil, aluminium slit coil, aluminum sheet, coated aluminum coil, diamond aluminum tread plate,and more. Whenever you have a need for any of our products, please feel free to contact us.
I need to know how to fix a refrigerator evaporator coil.
The evaporator is used to let the refrigerant expand and cool before the compressor sucks the cooled down air in.
That doesn’t tell me how to fix it when it isn’t cooling down the refrigerant enough.
If there is a layer of dust and cobwebs on it, it can’t evacuate the heat from the coolant that needs to cool down. The solution in that case is cleaning the coils.
Dusting the fridge has never been on my to do list.
Cleaning it out needs to be too, but you can get to that later. If the thick layer of dirt means the heat can’t escape, the coils can’t do their job and that’s why the coils aren’t cooling it all down.
I’ll be lucky if it is something that simple.
At least this is something you’re free to do, well, it is free to do. Another issue is just making sure the coils are far enough back from the wall and have enough air to circulate the heat and let it get away from the coils.
That’s the opposite of a dehumidifier freezing up because the cooler dry air can’t escape to the rest of the room, so it circulates around the unit getting colder and colder.
The side benefit of checking if the coils are clean is that the unit gets more than enough air flow.
And it lets me look for other problems.
If you see a few rust spots, I’ll know why the evaporator coils aren’t working well, either.
The refrigerant leaks, if there is one, may not be as obvious as a red rimmed pin prick hole. But you’d see a little bubbling or area specific moisture or even ice if there was one.
I know a refrigerant leak can make the air colder at that one spot, though if it lets enough refrigerant out to freeze the coils, you may not have enough refrigerant for the refrigerator to be cold.
I also know that I would hear the leak.
You’d hear some pinging or bubbling as the refrigerant escapes and air creeps in with each cycle until there is nothing but air in the system.
That would explain the lack of cooling if that’s the cause.
You’ll typically have the refrigerator run harder and longer to maintain the same temperature before it runs all the time to merely cool it down.
Then I risk the compressor lock up because it overheated.
If it runs hard enough to overheat, you need a professional both to refill the refrigerant and fix the compressor.
And seal the leak.
Depending on the severity, replacing the evaporator coils may be in order.
If it is my air conditioner, they can put a patch on the coils.
Copper coils can be patched, but aluminum coils typically have to be replaced in their entirety.
Technically that solves the problem.
You might need someone to check out the system before you replace the coils, though, because it is almost as likely that the refrigerant is leaking out of a seals, too.
Then we’re down to calling for service if cleaning it doesn’t fix it.