29 Years Factory cooking aluminum circle to Uruguay Importers
Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments for 29 Years Factory cooking aluminum circle to Uruguay Importers, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
Cooking aluminum circle also called cookware aluminum circle, kitchen aluminium circle,aluminium disc,utensil aluminum circle,aluminium circle for pans and pots
Thickness:0.4mm to 6mm
Diameter:100mm to 1500mm
Materials:CC and DC quality
Hangzhou Jinding Aluminium Industry Co., Ltd and Zhejiang Shuanglin Jiate Metal Technology Co., Ltd are famous
aluminum circle,aluminium discs factory in China, we have DC and CC produing line suitable for spinning and deep
PA THERMAL BREAKING PROFILES EXTRUSION LINE
Good insulation properties, current technology enables the
reduction of the thermal conduction U-factors (heat loss rate) of
a normal aluminium frame from over 4,5 down to 3W/m2 K.
Application in a wide range of temperatures (from – 30° C
to + 210° C). Nowadays a good aluminium window system must
be anodised or treated with powder paint, this means that the
assembled frame has to pass such operation which takes 15/20
min at 200°C, without undergoing any distortion.
Very good mechanical properties, the joint is responsible
for the mechanical connection of the interior and exterior window
frame, the final execution of the frame is proportional to this
Thermal expansion coefficient similar to aluminium material to
avoid internal stress that compromises the mechanical resistance
of the frame.
Last but not least a good process capability to attain an extruded
profile with tight tolerances.
This long list of characteristics reduces the choice to few
thermoplastic materials, among which the best solution is a
techno-polymer based on PA 6.6 reinforced with 25% fibreglass.
Once identified the raw material,
the extrusion technology can be developed for the efficient
production of the joint profile.
Single screw extruder is the best solution
to process PA + 25% fibreglass.
28:1 L/D ratio is suggested for a good melting of the
material; an accurate temperature control of the profile
is a must to keep a good tolerance on the final profile.
A special attention is given to problems due to wearing.
Adding 25% fibreglass to the material, special steel
and treatment must be used to reduce the wearing on
barrel and screw surface.
A particular screw design allows good performance and
the possibility to use up to 20% regrind material without
reducing the line performance and the final quality of
To achieve a good product, the extrusion technology
is a key point, only a great experience can guarantee
a good result .The kind of the raw material and the
required tolerances on the final product led to a
sophisticated multi-exit extrusion technology to achieve
high output.According to required hourly output and to
profile shape, 4 or 8 exit dies are used.
The size and output of the extruder are chosen according
to the required capacity of the line. The mainly used
extruders are EA 60, EA 70 and EA 90