2016 New Style 5000 Series Aluminum Plate for Liberia Manufacturers

Short Description:


Product Detail

FAQ

Product Tags

We are convinced that with joint efforts, the business between us will bring us mutual benefits. We can assure you product quality and competitive price for 2016 New Style 5000 Series Aluminum Plate for Liberia Manufacturers, Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!


This major series of this series aluminum plate provided by Mintai includes 5005, 5052, 5754, 5083 series.

5000 Series Aluminum Plate
♦ Width:500-2200mm
♦ Thickness:1-200mm
♦ Length:2000-8000mm
♦ Application:decoration, outer shell for household products
♦ Packing:blank waterproof paper , kraft, wooden case or pallet (fumigation report for the wooen packing material )
♦ Grade:5005 5052 5083 5086 5154 5182 5251 5754 etc.
♦ Features Very good elongation, anticorrosion performance

5000 Aluminum Plate Features
♦ The main ingredient of this series aluminum plate is magnesium element and the content is between 3% and 5%. It is also called aluminum magnesium alloy.
♦ With its low density, it features high tensile strength and elongation.
♦ This series aluminum plate is a commonly used and mature series in China.

5000 Aluminum Plate Applications
♦ With the same area of other series, the weight of this aluminum plate is lighter. As a result, it is used in aviation, such as in the fuel tanks in airplanes.
♦ It is widely used in conventional industries.
♦ This aluminum plate can be used in continuously casting and rolling. It can be hot rolled. As a result, it can be used in oxidation and deep processing.

Note:
Special dimensions can be produced according to your requirement

Hangzhou Jinding Aluminium Industry Co., Ltd.  is a professional manufacturer and supplier of 5000 aluminum plate based in China. We also offer aluminum coil, aluminium slit coil, aluminum sheet, coated aluminum coil, diamond aluminum tread plate,and more. Whenever you have a need for any of our products, please feel free to contact us.

  • Previous:
  • Next:
  • FAQ Content




  • Make yourself a real laser out of scraps, junk, pennies and clothespins!

    Inspired by Nyle Steiner’s work at

    http://www.sparkbangbuzz.com/tealaser/tealaser7.htm

    Thanks, Nyle! I learned a lot from this project, and it works surprisingly well.

    WARNING: This project uses HIGH VOLTAGE, and emits ULTRAVIOLET COHERENT LIGHT. So don’t go grabbing random stuff with your fingers, and don’t look into the invisible beam! I am not responsible for your blinded, twitching corpse if you screw up somehow. I can do this stuff because I have a lot of experience with high voltage and I know what I can get away with without killing myself… because I nearly have, several times. BE CAREFUL, keep one hand in pocket around HV kit, and wear safety glasses that block UV.

    This is a simple but real Ultraviolet Laser, requiring no optics and only a few parts. The only difficult/dangerous part is the 6 kv power supply, but the laser can be operated from any DC source capable of making the voltage necessary, like a VanDeGraaff generator for instance.

    The construction details can be found on Nyle’s website linked above, and the modifications and simplifications I made are obvious from this video. I decided to try the round barstock simply because I didn’t want to leave the house to go get some angle stock from the store. It seems to work fine! But I will also be trying the sharper edge of some brass shimstock for the smaller electrode later on; maybe it will work even better.

    To make this I used stuff that I had lying around the lab:

    A piece of 1/8 in thick Acrylite OP plastic for the base;
    Some heavyduty aluminum foil for the bottom capacitor plate;
    A piece of 0.004″ thick overhead transparency film for the dielectric;
    Some strips of aluminum duct tape for the upper capacitor plates;
    A 100k, 1/8 W resistor for the plate equalizer;
    A length of 3/8″ aluminum barstock for the “wall” electrode;
    A length of 3/16″ aluminum rod for the movable electrode;
    4 US Copper Pennies for the spark gap;
    Some clothespins to hold stuff down;
    Some misc. bits of aluminum tape to make connections;
    A “dayglow” plastic tub toy for a fluorescent target;
    A yellow dayglow 6mm plastic airsoft BB, ditto;
    A 4×6″ dayglow index card, ditto;
    A power supply, 24 VDC in, 6.4 kV 1.2 mA out.

    Total “new” cost: $0.04

    Thanks for watching!



    Who wants to see JustDustin whip Stablekneez’ butt in a workout? Check it out! It takes a lot to crush Chris you know. After all, he has ol man strength!

    Thanks to Dustin for helping us with this video. Go watch every video on his channel, if you haven’t already. Start with this BANGER…

    We love having fun together as a family, and we love competing with each other too! Tell us what else you’d like to see us do!

    Hey, and let’s be friends ev-er-y-where!

    Support us on Patreon:

    https://www.patreon.com/TheRents

    Follow us on Twitter:
    Chris – https://twitter.com/stablekneez
    Mandy – https://twitter.com/TheFurFiles

    Follow us on Instagram:
    Chris – https://www.instagram.com/stablekneez/
    Mandy – https://www.instagram.com/thefurfiles/

    THEME SONG remix by Quintessa Evangeline – https://www.youtube.com/QuintessaEvan…

    Translate this video for your name to appear HERE: http://www.youtube.com/timedtext_cs_panel?tab=2&c=UCJNogW3ttFGWIc0_ieiufVA

    Translate other videos here:

    http://www.youtube.com/timedtext_cs_panel?c=UCJNogW3ttFGWIc0_ieiufVA&tab=2

    Learn more about movement-based fitness HERE:

    http://www.humantwopointzero.com

    Peace

    Related Products