17 Years manufacturer Household Aluminum Foil to Canada Factory
Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for 17 Years manufacturer Household Aluminum Foil to Canada Factory, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
♦ Thickness: 0.009-0.03mm
♦ Width: 250-1280mm
♦ Material (alloy): 1235, 8011, 8079,8006
♦ Temper: Soft(O)
♦ Roll weight: 1-500kg/roll
♦ One side bright, the other side dull.
Supply aluminum kitchen foil in small roll, aluminium household foil. We also supply rewinding machine which rewind big foil rolls into small rolls, and the packing/wrapping machine for small rolls.
Household Aluminum Foil Application:
Used in family, supermarket or restaurant kitchen, to wrap food and keep food fresh when baking, roasting or cooking.
Household Aluminium Foil Jumbo Roll (Alloy 8011/8006/3003)
Our household aluminium foil jumbo roll is a superior household material for packaging which can resist water and oil. It can be reused and can isolate light and conduct heat. Because of these features, it is widely used in the food packaging industry .
Aluminum Foil for Food–including food packaging and food container:
|Container Foil||Food Container||3003/8011||O/H22/
|Household Aluminum Foil||Food packing||1235/8011||O||0.01mm
|Aluminum Foil for Hot Seal||Bottle Hot Seal||1050/1060/
Please find this product at http://absupply.net/searchfast.aspx?videoid=17WwVUER-EM This video is to bring you a closer look at the National Guard 896V. This is called a latchtrack type threshold. The 896 is representative of the profile of the threshold, a latchtrack it could be called or a bump-up style it could be referred to. V stands for the fact that the insert material here is vinyl. Typically is shipped loose and you just slide it in to place. Also available in the dark bronze finish, it would be the same part number with a DKB at the end. Very attractive, nice threshold. There is an image below this video showing everything important about it, let’s take a look at that now. You can see from that you’ve got a threshold that’s 5″ wide, that is indeed the case, and you’ve got one that’s 1/4″ rise over here, and then 1/2″ overall height. And this as a latchtrack threshold is somewhat, not uncommon, but less common than something that would be closer to 1/2″ here with a 7/8″ overall height. To use something like this you’re generally dealing with a smaller than standard undercut or a tighter than average distance between the bottom of the door and the sill. So keep in mind that this one is specifically intended when you have only about a 3/8″ margin between the bottom of the door and your sill. It’s called a latchtrack and it’s used in an application when you have pairs of doors, or a single door for that matter but typically pairs of doors, with surface vertical rod exit devices. The profile back here is what gives it the idea or the name latchtrack because this feature to threshold allows the threshold to act as the bottom strike of a surface vertical rod panic device, eliminating the need to add a strike down at the sill. A latchtrack threshold like this does that job and is very commonly used for it. I see this on the back of large box doors where they have pairs of doors that are really just emergency exit only and every single time I see these installed in that exact application. But a lot of people just like a bump-up style threshold where the door literally makes very significant contact with the face of the threshold, allowing it to compress the seal and making a very positive weather seal at the bottom. Vinyl is a very typical material that’s used. Available in several different lengths. If you have need for a custom length, by all means let us know by ordering the next longest piece or pieces and indicating in the comment field what length you’d like us to cut the material back to. The reasoning is if you had to take this 3′ piece and cut it down to say 32″, you’d likely eliminate that countersink and then the next one’s all the way over here. So if you order a custom length we’ll not only locate the countersink at the proper distance from the edge but the proper center to center as well. The idea there being you’re doing less labor, you know you’d have to re-drill a hole after you cut it. So whichever way you prefer, we’ll be able to handle that for you. The sound of the screws prevents me from forgetting to mention that they’re included. They look like they’re about a 10 x 1-3/4″ flathead wood screw in a complimentary finish. National Guard is a full line manufacturer of all things commercial weather stripping related, they do a real good job with weather stripping. I would not hesitate to specify or supply them and recommend them on any job whatsoever. Any questions on the National Guard 896S latchtrack style threshold in a mill aluminum finish or any other National Guard product, please feel free to reach out to us.
This series of equipment can be used to produce 202-603# easy peel off lid, especially suitable for 307-603# large tinplate easy peel off lid. The machines can finish processing steps of the cover falling, punching, drawing, curling, stamping aluminum foil pre sealing, sealing, embossing, output and other functions automatically. Each function module controlled by independent servo can be adjust the parameters individually, and realize the high-speed response and synchronous operation. The way of oblique arrangement can make the aluminum foil waste least.
New models can be designed according to user’s requirements. We can make any new model according to clients’ requirement.
Mobile:+86-15088780590 Website: www.hzsunking.com
Address: Renhe Town, Yuhang District, Hangzhou China