12 Years Factory wholesale 5000 5-bar Aluminum Tread Plate Wholesale to Buenos Aires
We have advanced equipment. Our products are exported to the USA, the UK and so on, enjoying a good reputation among customers for 12 Years Factory wholesale 5000 5-bar Aluminum Tread Plate Wholesale to Buenos Aires, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
The major series of this series aluminum tread plate provided by Jinding includes 5005 5052 5083 5086 5154 5182 5251 5754 series etc.
♦ 5000 Aluminum tread plate
♦ Pattern:diamond,1 bar ,5 bars.
The main ingredient of this series aluminum tread plate is magnesium element and the content is between 3% and 5%. It is also called aluminum magnesium alloy.
With its low density, it features high tensile strength and elongation.
This series aluminum tread plate is a commonly and mature series in China.
With the same area of other series, the weight of this aluminum tread plate is lighter. As a result, it is used in aviation, such as in the fuel tanks in airplanes.
It is widely used in conventional industries.
This aluminum tread plate can be used in continuously casting and rolling. It can be hot rolled. As a result, it can be used in oxidation and deep processing.
You can use aluminum tread plate sheets in the floor of automobile, airplane, light rail, vehicle steps, stair treads, elevators, etc. You also can use tread plate sheets in your garage or workshop for a variety of purposes.
As a professional manufacturer and supplier of 5000 aluminum tread plate based in China, we also offer aluminium slit coil, diamond aluminum tread plate, anodising aluminum coil, aluminum coil, aluminum strip, coated aluminum coil, etc. for you to choose from.
Part 1 — Laying Out the Pipe and Flattening – http://youtu.be/l3An65Z3PxA
Part 2 — Shaping the Handle and Checking Tiller – http://youtu.be/gCioiD6Upzg
Part 3 — Forming the Static Tips and Stringing – http://youtu.be/5v0f7z0oirA
Part 4 — The Finished Bow and Limb Wraps – http://youtu.be/QB2IapLd0fY
Part 5 — Shooting the Finished Bow – http://youtu.be/KeC7CgfNn9w
I really enjoyed the archery in the Hunger Games movie, especially when it came to picking out the bows and trying to figure out how they were made. It’s also quite funny to see a bow go from being right side up in one shot to upside down in the next, only to be right side up a second later. That aside, of the three separate styles of bow I saw in the movie, my favorite was the very first bow.
In the book, the bow Katniss used for hunting in District 12 was made by her father. It wasn’t her bow, she grew out of her own, it was one of her father’s hunting bows. I was impressed by the fact that, while it looked light a very light-weight bow (and had to be for filming reasons), the first bow was a wooden bow. While a bow in this style is very straightforward, building one can be tricky. It’s so simple, it’s the only bow you can get a ‘prop replica’ version of. It’s so tricky, these replicas are not meant to be used in any capacity.
In this little video series, we’re going to build a bow like the one in the movie, adapted to the strengths of PVC pipe. It’s a single-piece bow made of one PVC pipe without any wood or fillers. While it is a light bow at around 20-25 pounds, it still is pretty fast and a great bow for fine-tuning your form or costuming. If made from 1 inch pipe, this bow would probably be closer to 40-50 pounds and not true to the movie-bow dimensions, which was a 20-25 pound bow. But that’s another video.
Thanks for watching and enjoy!
Here’s a better description of some things you will need as well as links to videos and some items on Amazon.
3/4″ Schedule 40 PVC pipe, 56 inches long (1.05in outer diameter, 0.12in thick walls; 26mm outer diameter, 3mm thick walls)
The heating trough is made of a non-conductive base like cardboard or wood shaped like a gutter or round tube, covered in a reflective material like aluminum foil or flashing.
The clamp used on the ends of the bow is made of two 1×2 boards cut 9 inches long, connected by a hinge with a 1/4″ gap between the boards.
Heat Gun or other heat source
Milwaukee Dual Heat (my heat gun) – http://www.amazon.com/dp/B00004TI25/?tag=backyardbowye-20
Dewalt Heat Gun (heard good things) – http://www.amazon.com/dp/B00307B4P0/?tag=backyardbowye-20
Wagner Heat Gun (works well, not too shock resistant but very economical) – http://www.amazon.com/dp/B00004TUCV/?tag=backyardbowye-20
Adjustable Flattening Jig — http://youtu.be/i1Eub3KWSRI
Simple Flattening Jig — http://youtu.be/XaLi5_-XXek
Bar Clamp – http://www.amazon.com/dp/B0000224BP/?tag=backyardbowye-20
Poly Rope for Strings (keep in mind that the bow’s weight should not exceed the safe load limit. Polyester usually has a higher load limit than polypropylene)
Polyester 3/16″ – http://www.amazon.com/dp/B0078RUD6E/?tag=backyardbowye-20
Polypropylene 3/16″- http://www.amazon.com/dp/B002T44UJW/?tag=backyardbowye-20
Polyester 5/32″ – http://www.amazon.com/dp/B005TLVAUE/?tag=backyardbowye-20
Polypropylene 5/32″- http://www.amazon.com/dp/B0014CZXSM/?tag=backyardbowye-20
Nylon Thread for Wrapping – http://www.amazon.com/dp/B00114Q1U2/?tag=backyardbowye-20
Simple PVC Pipe Bows – http://www.amazon.com/dp/1478140917/?tag=backyardbowye-20
Take-Down Archery – http://www.amazon.com/dp/1479348481/?tag=backyardbowye-20
The Impossible Bow – http://www.amazon.com/dp/098324815X/?tag=backyardbowye-20
The Backyard Bowyer – http://www.amazon.com/dp/0983248109/?tag=backyardbowye-20
Soldering aluminum to copper with Superior Flux’s AL26-33-75 direct aluminum to copper soldering paste. This water-soluble easily cleaned paste eliminates the need for tinning aluminum before soldering and can be used for applications like aluminum to copper part connections such as LED lighting and heat sinks. Contact Superior Flux at (440) 349-3000 or email at firstname.lastname@example.org to get more information about this product or to purchase. Visit us at our webpage, www.superiorflux.com.