12 Years Factory Aluminum rod to Qatar Factory
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for 12 Years Factory Aluminum rod to Qatar Factory, If you are interested in any of our products and services, please don't hesitate to contact us. We are ready to reply you within 24 hours after receipt of your request and to create mutual un-limited benefits and business in near future.
1.Surface:mill finished, anodized
4.Length:cutting according to customer’s request
5.Mould:made according to customer’s drawings or sample
Aluminium extrusion cooling quenching system
1. To meet the requirements of different alloy in cooling and ensure high mechanical property.
2. To avoid deformation and ensure the dimensional precision.
3. High productivity and high efficiency.
4. Energy saving and low production cost.
5. Easy operation and smooth running.
6. Easy maintenance and long life design.
Guangdong Save Aluminium Equipment Co, Ltd is specialized in R&D for the aluminium extrusion technology and related machinery. We are the first professional quenching system manufacturer for aluminium extrusion line in china.
We own a huge contingent of technicians with an overall 30% engineer team who dedicated to ensure our technical strength, including extrusion techniques, automatic control, mechanical design and manufacture, hydraulic technology and engineering thermodynamics.
Machinery service at home and overseas is available. Once equipment is installed, we adjust it, train your personnel to operate it, and get it into service quickly. After installation, we follow up to make sure equipment is performing at peak efficiency and that you are completely satisfied.
An authorized third party is entrusted to monitor and inspect our production line.
Order replacement parts any day of the week, any time with out 24-hour parts hotline, more than 80% of component replacement parts are available for delivery the next day or sooner. If equipment goes down, help is available immediately with SAVE’s HMI support. Service is free during standard business hours, with additional assistance available 24/7. We’ll run diagnostics on your system via HMI and walk you through any repairs.
Guangdong Save Aluminium Equipment Co, Ltd.
Add: Muyuan Industrial Park, Shishan Town, Nanhai District, Foshan, Guangdong province, China
For More Information:
Textured Non-Skid or Anti-Slip boat decks, cockpits and swim platforms provides important traction, but they all suffer from the same problems. They’re constantly getting chalky and dirty. They stain easily from fish blood, red wine and bird droppings. They require constant scrubbing to keep them clean. They get dull, making your boat look old and tired before its time. And, you can’t protect them with boat wax without making them dangerously slippery, especially when they’re wet.
It doesn’t matter if yours is a fishing boat, a sailboat a RIB, a wakeboard boat or a cruiser. Maintaining non-skid boat decks is the most tedious part of boat cleaning. There’s no end to it.
But now, there’s a better way. Sure Step promises to restore your faded boat deck to like new again and reduce your maintenance. Imagine your boat decks looking shiny and new and never having to scrub them again. That’s what Sure Step can do for you.
Today, we’re going to show you how easy it is to restore the deck on this tired 1987 Sea Ray. with Sure Step
The deck of this boat has more chalk than a math teacher’s blackboard and look at the dirt and stains. Sure Step is a sealer as well as a protective polish. We need to get this deck pristine so we don’t seal in the crud.
First, we’re going to clean a small test area to verify that we get the results we want and to make sure there are no unexpected problems.
This looks good. Can you see how bright white it is? It almost fluoresces.
I can’t stress enough how important it is to get the surface spotless.
The finished job can only look as good as the gelcoat, before we seal it with the Sure Step anti slip coating. Boat Clean Plus and Boat Scrub are the best products you can use for this boat cleaning. No other boat deck cleaner can give you the same results. These two cleaners will deep clean the gelcoat, not just the surface and remove any chalk or oxidation. And they’re free rinsing so there’s no residue to impair attachment of the Sure Step.
Now that we have a successful test, getting this deck clean will be quick and straight forward. We’ll use the deck brush for the large areas, a scrub brush for the tighter areas and a Marine Power Mitt for the smooth surfaces.
First wash the deck with Boat Clean Plus. Apply some Boat Scrub and give it a good scrubbing. Now rinse everything clean. These products are biodegradable so they won’t hurt the lake or the fish.
Check the surface for marks and stains that didn’t come out. I can see that the birds have been in the berry patch and have left stains in the gelcoat.
Use a 50 – 50 solution of Boat Clean Plus and Boat Scrub and scrub the stains out. This may require some effort,but, they will come out.
Well, that’s the hard part done. How would you like to get your decks this clean and bright?
Let the deck dry completely so you don’t seal moisture into the gelcoat.
Now we can apply Sure Step to all surfaces, non-skid as well as smooth. Use a white, high density foam, mini paint roller.
They work best. You can press the Sure Step into the pores and spread it out thinly so you get maximum coverage and don’t waste material. Do the whole deck including the walk around areas and let it dry to a haze.
Here’s a tip from a professional boat detailer. Wipe the deck with a soft cloth before buffing in order to remove excessive surface haze. This will reduce buffing time.
Buffing is the easy part. Attach a loose cotton buffing wheel to a portable drill and your special buffing machine is ready.
By the way.Rotary buffers don’t work on non-skid surfaces.
Lightly buff the deck until it shines. Let the wheel do the work for you.The cotton fibres get into the crevices and polish out the haze. Alternate the direction to buff out all the surfaces. This is easy and fun.
Look at the how the shine is starting to come up on this old boat deck. And, this is only the sealer coat. Isn’t that beautiful?
We need to let the 1st coat cure for a minimum of 24 hours before we apply the polish coat.
Because of the weather, it’s been a week since we applied the sealer coat so we’re going to rinse off any dirt and bird droppings before applying the polish coat. Since the deck is already sealed, dirt will hose off easily.
The 2nd Sure Step polish coat goes on just like the 1st, with a paint roller. When it dries to a haze, give it a quick wipe and buff it to a beautiful shine.
There you have it. Shiny, clean and looking brand new again.
To prove that this deck is not slippery and safe to walk on, we sprayed it with water and then got Pete to walk on it. Nope! No slipping. You even get more grip when the decks are wet. This is an important safety feature of Sure Step deck polish and protector…